Author Topic: Growing your own arrow shaft material!  (Read 4151 times)

0 Members and 1 Guest are viewing this topic.

Offline Jakesnyder

  • Member
  • Posts: 458
Growing your own arrow shaft material!
« on: November 09, 2022, 01:22:43 pm »
I have some hill cane and red osier dogwood I'm growing. I'm hoping to have some usable material in another couple years. Anyone else doing this? Just thought I'd share. These are 1 year of growth.

Offline StickMark

  • Member
  • Posts: 301
Re: Growing your own arrow shaft material!
« Reply #1 on: November 10, 2022, 08:57:36 pm »
Sort of.
There are some thickets of mulefat that I sort of tend and harvest from along the creeks here in S. Az, at about 3500-4500 feet elevation. I keep a good mental map of where to go in early February, after our Winter season ends. Besides harvesting, I will pull up some shoots and sort of stuff them upward in other shoots, encouraging straighter growth for next year, or at least until the next flood.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Growing your own arrow shaft material!
« Reply #2 on: November 10, 2022, 10:50:29 pm »
Many of the sourwood shoots I use come from road cuts that get bushhoged every 3 or 4 years. The bushhogging is almost like coppicing but by a state road crew and not me. I have planted silky dogwood along the creek that runs through our property. I just cut shoots in January or February and just jam them in the bank. Bu spring they have rooted and start to grow. Hill cane naturally grows along the creek so all I have to is harvest culms for shafts.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Growing your own arrow shaft material!
« Reply #3 on: February 12, 2023, 04:06:32 pm »
Wild rose grows in my property. Jawge
Set Happens!
If you ain't breakin' you ain't makin!

Offline bjrogg

  • Member
  • Posts: 11,016
  • Cedar Pond
Re: Growing your own arrow shaft material!
« Reply #4 on: February 17, 2023, 09:19:39 am »
Viburnum or “snowball bush” grows on many older homesteads around here. My aunt and neighbor have them and occasionally I harvest a few shafts.
A hot cup of coffee and a beautiful sunrise

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Growing your own arrow shaft material!
« Reply #5 on: February 17, 2023, 10:56:18 am »
Jake, even though those red osier is first year growth(with just leaves) you will have to wait for the plant to get established themselves then send up shoots that are big enough for shafting. These shoots will grow to their ultimate height that first year then mature enough to be shafts after the second year. You may have to wait a couple of years for this but the sooner to plant the sooner the harvest time comes.
 In your second pic that plant looks like a willow to me, typical "willow leaf" style leaf.
 Brian, most viburnums have those shoots are I imagine most viburnums well make good shafting as long as they are the right diameter and not too big or too small.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Parnell

  • Member
  • Posts: 5,556
Re: Growing your own arrow shaft material!
« Reply #6 on: February 18, 2023, 09:20:48 am »
Yes, I started some Japanese arrow bamboo some months back.  Had to move it though as the landscapers kept whacking it down.  It’s going better now.
1’—>1’

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Growing your own arrow shaft material!
« Reply #7 on: February 18, 2023, 09:39:55 pm »
Where I live now I can just walk to the creek behind the house and cut River Cane. And I know where a bunch of Japanese Arrow Boo is.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Buckskinner

  • Member
  • Posts: 211
Re: Growing your own arrow shaft material!
« Reply #8 on: February 19, 2023, 01:56:26 pm »
Wild rose grows in my property. Jawge

I just got back from taking a walk and cutting about 2 dozen multifloral rose shoots for arrows.  Knocked off the thorns and have them bundled around half inch pvc to dry. Hopefully they work as good as they look like they will!  No, I did not plant them but have cursed at them countless times...