« previous next »
Pages: [1]

Author Topic: Will sinewing affect heat shaped timber?  (Read 932 times)

0 Members and 1 Guest are viewing this topic.

Offline stuckinthemud

  • Member
  • Posts: 2,355
    • avenue woodcarving
Will sinewing affect heat shaped timber?
« on: February 25, 2022, 05:29:46 pm »
I have a short bow, very light weight, I am going to sinew with two or three layers of sinew. There has been some heat shaping, flipped the tips a little, some sideways correcting and reflex one limb to match the natural reflex in the other limb. Draw weight is 28@24”.  Will the water from the glue and sinew undo any of the heat-shaping?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Will sinewing affect heat shaped timber?
« Reply #1 on: February 25, 2022, 08:13:18 pm »
No, it shouldn't but be sure you give it plenty of time to dry back out before you strain it.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC
Pages: [1]
« previous next »