« previous next »
Pages: [1]

Author Topic: Bow type question  (Read 1027 times)

0 Members and 1 Guest are viewing this topic.

Offline Woody roberts

  • Member
  • Posts: 179
Bow type question
« on: October 06, 2021, 09:30:07 am »
I have Pyramid bows, Sudbury, Mollegabit but several of the bows I’ve made are flat bows, parallel sides to mid limb then taper to the nocks

What is the name of this type of bow?
Logged

Offline Parnell

  • Member
  • Posts: 5,556
Re: Bow type question
« Reply #1 on: October 06, 2021, 09:40:21 am »
Mmm, American Flat bow?
Logged
1’—>1’

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Bow type question
« Reply #2 on: October 06, 2021, 10:20:43 am »
 A semi-pyramid goes parallel for a while before a straight taper to the tips.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Woody roberts

  • Member
  • Posts: 179
Re: Bow type question
« Reply #3 on: October 06, 2021, 09:20:03 pm »
Thanks. That’s about what I do
Logged

Offline Selfbowman

  • Member
  • Posts: 3,161
Re: Bow type question
« Reply #4 on: October 06, 2021, 10:17:24 pm »
It’s a good design but you an also control the bend with the thickness in the limbs . I sometimes do this to help prevent set, strengthen outer tips with less mass and on and on. Depending where you are at in designing bows. Arvin
Logged
Well I'll say!!  Osage is king!!

Offline Hawkdancer

  • Member
  • Posts: 5,040
Re: Bow type question
« Reply #5 on: October 06, 2021, 11:10:34 pm »
Paul Comstock's version of the ancient Meare Heath/Holmgard bows? :BB. Good bows?
Hawkdancer
Logged
Life is far too serious to be taken that way!
Jerry
Pages: [1]
« previous next »