« previous next »
Pages: [1]

Author Topic: elm static recurve  (Read 1468 times)

0 Members and 1 Guest are viewing this topic.

Offline Jjpso

  • Member
  • Posts: 101
elm static recurve
« on: June 30, 2021, 03:26:20 pm »
hello everyone!
first time tillering a static recurve...Can someone give an opinion on the tiller? its elm sapling pyramidish profile, 55 ntn, with upper limb 1 inch longer than lower one. I am at 24“ (my draw is 25-25,5 inches) with 54# (my target weight) started with 3 inches reflex, and now has 1.5 " after taking string, and gets to 2" in a matter of minutes. .... whats your opinion?! Thank you
Logged

Offline Jjpso

  • Member
  • Posts: 101
Re: elm static recurve
« Reply #1 on: June 30, 2021, 03:27:15 pm »
sorry for the drawing photos, they are a bit far....
Logged

Offline RyanY

  • Member
  • Posts: 1,999
Re: elm static recurve
« Reply #2 on: June 30, 2021, 03:54:30 pm »
Im not sure how straight the stave was before tillering but it looks like it’s taken most of the set around mid-limb. Being a pyramid profile with the wider inner limbs I think you could easily squeeze the last inch of draw with a little scraping in the inner limb without taking additional set. Looks like a nice even bend though.
Logged

Offline PaSteve

  • Member
  • Posts: 816
Re: elm static recurve
« Reply #3 on: June 30, 2021, 05:48:47 pm »
Totally agree with Ryan. I had a very similar situation on a hackberry static and was advised to get the inners moving a little more. It does look very promising though.
Logged
"It seems so much more obvious with bows than with other matters, that we are the guardians of the prize we seek." Dean Torges

Offline SLIMBOB

  • Member
  • Posts: 3,759
  • Deplorable Slim
Re: elm static recurve
« Reply #4 on: June 30, 2021, 06:43:46 pm »
+1 Ryan.
Logged
Liberty, In God We Trust, E Pluribus Unum.  Distinctly American Values.

bownarra

  • Guest
Re: elm static recurve
« Reply #5 on: July 01, 2021, 04:19:00 am »
As above :)
Logged

Offline hoosierf

  • Member
  • Posts: 492
Re: elm static recurve
« Reply #6 on: July 01, 2021, 12:54:55 pm »
Yep, needs to bend more out of the fade but go slow. 
Logged
Pages: [1]
« previous next »