The Mouse Slayer

[PaSteve]

When dealing with a sliver, it's very easy to get a hinge. Great job. I like it.

[Pappy]

Very cool, rather make a full sized bow anytime than one of them, very tricky bows to make. Nice job.
 Pappy

[freke]

my dyslectic mind read Moose slayer, expected something bigger 

Lovingly little thing

[WhistlingBadger]

Thanks, guys!  This was a fun little project while I'm waiting for a couple of buddies on here to send me some staves (wink, wink, nudge, nudge) so I can start on the next full-sized project.  It was a lot harder, and a lot more fun, than I expected.

Here's a few more pics.
The back.
100_0528 by Whistling Badger, on Flickr

String and tip detail.  I served the string with black just because it looked cool.  I had to cut the nocks so shallow that the string was popping out, so I used tweezers to glue little bits of bamboo under them so it would stay in place.
100_0529 by Whistling Badger, on Flickr

Unbraced.  The top limb has taken a lot of set.  The bottom limb actually started out slightly reflexed.  I left it alone because I didn't want to heat treat something this thin.  But it evens out at full draw, so good enough.
100_0530 by Whistling Badger, on Flickr

[WhistlingBadger]

Nice job, quite tricky those tiny bows.
Shot it though the chrono' yet
Del

OK, Del, you got my curiosity going:

IMG_3304 (1) by Whistling Badger, on Flickr

My kid's got a real speed demon on her hands, here.   

[Digital Caveman]

I didn't know little bows could be entered in BOM, but it makes sense; good luck,

[Winter Hawk]

That has to be the cutest little thing since God made kittens, very well done!

~Kees~

[George Tsoukalas]

Very nice! Jawge