« previous next »
Pages: [1] 2 3 ... 10

Author Topic: Start of an osage ALB  (Read 24641 times)

0 Members and 1 Guest are viewing this topic.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Start of an osage ALB
« on: January 24, 2021, 03:12:11 pm »
I got this stave from the Tenn. Classic 2 years ago. Maybe from Clint but I don't remember. I removed the bark and sapwood a few weeks ago but was waiting for new bandsaw blades before I proceeded. The blades came in a few days ago so I started reducing the stave to look like a bow.
Here are a few end grain pics first...




here the stave has been reduced to 2" wide. You will see some prop twist. I may try to build the bow without heat correction but I'll just have to see.


this is what I use to mark out the center line. It is similar to a Gizmo with some changes. The dowels ride along the sides of the stave.


I cock the tool one way and draw the line...


then cock it the other way and draw the line. Where the line doubles I split the difference. This does a pretty good job of determining the center line.

Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Zugul

  • Member
  • Posts: 137
Re: Start of an osage ALB
« Reply #1 on: January 24, 2021, 03:16:33 pm »
that's a very ingineous solution, I think I'm going to steal your idea  :D
Logged

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Start of an osage ALB
« Reply #2 on: January 24, 2021, 03:19:38 pm »
looking great, nice stave for sure,, :)
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Start of an osage ALB
« Reply #3 on: January 24, 2021, 03:20:56 pm »
Next I mark out the center, lengthwise and center my 4" handle there. This bow will have 4" fades as well so I mark them also...


I make these marks all around the stave for reference. This is one side. The back is at the top...


and finally I cut out the side profile and handle. I have cut the limbs at 3/4" their full length. This will allow me to find a good back ring. There is one thicker one a few rings down that I will try for.

Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline bentstick54

  • Member
  • Posts: 770
Re: Start of an osage ALB
« Reply #4 on: January 24, 2021, 04:18:40 pm »
Will be following this one close.
Logged

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Start of an osage ALB
« Reply #5 on: January 24, 2021, 05:03:21 pm »
yes I think the natural reflex is gonna shoot great
Logged

Offline Allyn T

  • Member
  • Posts: 1,397
  • I'm addicted to information
Re: Start of an osage ALB
« Reply #6 on: January 24, 2021, 05:10:09 pm »
Looks good pat I'm excited to see how it goes. Like your centerline tool
Logged
In the woods I find my peace

Offline bjrogg

  • Member
  • Posts: 11,016
  • Cedar Pond
Re: Start of an osage ALB
« Reply #7 on: January 24, 2021, 08:54:37 pm »
I’m watching Pat.  (-P
Bjrogg
Logged
A hot cup of coffee and a beautiful sunrise

Offline redhillwoods

  • Member
  • Posts: 123
Re: Start of an osage ALB
« Reply #8 on: January 24, 2021, 09:05:12 pm »
I'll be following with interest.
Logged

Offline Bob Barnes

  • Member
  • Posts: 942
Re: Start of an osage ALB
« Reply #9 on: January 24, 2021, 09:13:50 pm »
Logged
Seems like common sense isn't very common any more...

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Start of an osage ALB
« Reply #10 on: January 24, 2021, 09:25:15 pm »
Allyn, the centering tool was my first attempt at a tillering Gizmo when Eric first came out with it. Then I had the thought about making a centering tool. I can remove the pencil, flip the block over, reinstall the pencil and use it as a Gizmo. my only change for the centering tool would be to make it longer so it would accept a larger stave. I don't remember where I got the idea for the centering tool.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Fox

  • Member
  • Posts: 997
Re: Start of an osage ALB
« Reply #11 on: January 24, 2021, 09:35:30 pm »
Logged
Why must we make simple things so complicated?

Offline PaSteve

  • Member
  • Posts: 816
Re: Start of an osage ALB
« Reply #12 on: January 25, 2021, 04:38:57 am »
Interesting idea with the centering tool. Definitely following your build. Thanks for doing it.
Logged
"It seems so much more obvious with bows than with other matters, that we are the guardians of the prize we seek." Dean Torges

Offline Allyn T

  • Member
  • Posts: 1,397
  • I'm addicted to information
Re: Start of an osage ALB
« Reply #13 on: January 25, 2021, 08:08:00 am »
Quote from: Pat B on January 24, 2021, 09:25:15 pm
Allyn, the centering tool was my first attempt at a tillering Gizmo when Eric first came out with it. Then I had the thought about making a centering tool. I can remove the pencil, flip the block over, reinstall the pencil and use it as a Gizmo. my only change for the centering tool would be to make it longer so it would accept a larger stave. I don't remember where I got the idea for the centering tool.
The idea came from your brain pat ;)
Logged
In the woods I find my peace

Offline Parnell

  • Member
  • Posts: 5,556
Re: Start of an osage ALB
« Reply #14 on: January 25, 2021, 08:40:06 am »
Get it, Pat!  Get it!

Glad to watch you work!
Logged
1’—>1’
Pages: [1] 2 3 ... 10
« previous next »