« previous next »
Pages: [1]

Author Topic: Rattan bows  (Read 1504 times)

0 Members and 1 Guest are viewing this topic.

Offline Jacob1

  • Member
  • Posts: 67
Rattan bows
« on: September 30, 2020, 08:23:35 pm »
Does rattan hold curves with dry heat
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: Rattan bows
« Reply #1 on: September 30, 2020, 09:11:18 pm »
Maybe boiling or steaming.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline medicinewheel

  • Member
  • Posts: 3,629
Re: Rattan bows
« Reply #2 on: October 01, 2020, 01:29:06 am »
No steaming or boiling, just dry heat. Just wait for the bended part to cool out, and go on making a bow. Corrections can be made with dry heat at any time of the progress. The two kid's bows in the pics were made in one day from one piece of Rattan.
Logged
Frank from Germany...

Offline Jacob1

  • Member
  • Posts: 67
Re: Rattan bows
« Reply #3 on: October 01, 2020, 08:33:27 am »
Thanks frank that is very helpful because I have a heat gun but don’t have any idea how I would a steamer as I don’t have much space
Logged

Offline Jacob1

  • Member
  • Posts: 67
Re: Rattan bows
« Reply #4 on: October 01, 2020, 12:11:06 pm »
Also what are good places to get rattan near Virginia
Logged

Offline medicinewheel

  • Member
  • Posts: 3,629
Re: Rattan bows
« Reply #5 on: October 02, 2020, 12:43:01 am »
You can always check for plain rattan sticks online. My two bows are 10§ worth of material.
Logged
Frank from Germany...

Offline Jacob1

  • Member
  • Posts: 67
Re: Rattan bows
« Reply #6 on: October 02, 2020, 04:06:04 pm »
What is a good diameter to get
Logged

Offline medicinewheel

  • Member
  • Posts: 3,629
Re: Rattan bows
« Reply #7 on: October 03, 2020, 03:13:12 am »
2"+
Logged
Frank from Germany...
Pages: [1]
« previous next »