« previous next »
Pages: [1]

Author Topic: Timing of adding in recurve  (Read 1206 times)

0 Members and 1 Guest are viewing this topic.

Offline Kidder

  • Member
  • Posts: 637
Timing of adding in recurve
« on: July 19, 2020, 08:15:08 pm »
When is the best time in the build to recurve the tips of a flat bow? Once floor tillered, once long string tillered, or once you’re done your final tiller? Or
some other time altogether? Thanks in advance.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Timing of adding in recurve
« Reply #1 on: July 19, 2020, 09:02:22 pm »
I recurve after first brace. At first brace the tips have been thinned for better heat penetration and you can adjust string alignment and then recurve the tips making sure the tips line up well.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline PaSteve

  • Member
  • Posts: 816
Re: Timing of adding in recurve
« Reply #2 on: July 20, 2020, 06:12:45 am »
Agree with everything Pat said.
Logged
"It seems so much more obvious with bows than with other matters, that we are the guardians of the prize we seek." Dean Torges

Offline snag

  • Member
  • Posts: 419
Re: Timing of adding in recurve
« Reply #3 on: July 20, 2020, 09:14:13 am »
Not meaning to hijack your post. In conjunction to your question, can you heat bend a tip more than once?
Logged
Is. 49:2 ....He made me a polished arrow and concealed me in His quiver.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Timing of adding in recurve
« Reply #4 on: July 20, 2020, 10:52:24 am »
I've reheated a couple of times to make corrections after bending the recurves.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline sleek

  • Member
  • Posts: 6,764
Re: Timing of adding in recurve
« Reply #5 on: July 21, 2020, 04:52:12 am »
I have had no luck bending once im at final thickness, they always seem to lift a splinter that needs ground down. I do it when the stave is floor tillered and leave the tips 1/2" thick and no less than 1 inch wide. That allows for material to remove when splinters pop.

Pat, id love to know how you and others get away with how you do it.
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Timing of adding in recurve
« Reply #6 on: July 21, 2020, 07:29:35 am »
Trial and error over 30+ years of building wood bows and listening and following what has worked for others.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC
Pages: [1]
« previous next »