Author Topic: Arrows for heavy bows?  (Read 1786 times)

0 Members and 1 Guest are viewing this topic.

Offline Mafort

  • Member
  • Posts: 424
Arrows for heavy bows?
« on: July 20, 2020, 02:33:28 pm »
So for those who shoot heavy bows. How would you figure the spine for your arrows? Does that change? Is there a certain diameter you go for? Also can anyone post pictures for inspiration? I know I’ll need to reinforce the string nock. I’m aiming for a 100lb warbow but I’m unsure as to how to build the arrows.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Arrows for heavy bows?
« Reply #1 on: July 20, 2020, 03:33:40 pm »
If you'll be shooting your bow as a war bow I don't think spine is critical. Arrows for war bows can be up to 1/2" diameter and 30+" long.
Since you want arrows for a war bow I'll move this to "War Bows" if you'd like or you can post it there also. That's where you'll get your most informative answer.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Mikkolaht

  • Member
  • Posts: 93
Re: Arrows for heavy bows?
« Reply #2 on: July 29, 2020, 06:49:53 am »
I go for 12mm at tip and the last 2/3rds tapers evenly to 8mm at nocking point.
Regular pine shafts.
They shoot well at 30 inches long from a +120lb bow.
I don't measure spine at all on those,I only test the shafts bending with my hands.
If they are stiff enough i use them.