It's very similar to all the other bows I've posted. 1 3/8 wide tapering to 1" at 19" and then to 3/8" at the tips. 42#@28". Boo backed Yew. I trapped the back, Thanks Bownarra. Bow weighs 420 grams. It had 6 1/8" reflex right after glue up. It's 5 3/4" right now after an overnight sit. It has been 5"-5 1/2" right after unbracing. The set it did take was in the 6" right out of the fades. I had barely enough wood there. In hindsight a power lam may have been in order but I did keep all my heat treat in that area. Oh, I heat treated the belly piece very dark and from both sides. The right (top) limb took the most set so the unbraced and 20" draw pics don't look right. The set didn't happen until the last 2-3" s I didn't try and sort it out. If I could have kept both limbs the same as the left(bottom) limb I think there may have been another couple of fps in it. I'll start pumping arrows through it today as long as my arms last. Haven't been shooting much. I only draw 26-27" when I'm shooting so it shouldn't stress it too much. We'll see.
Thanks for the comments.
Scp- I think I'll do a separate thread on the machine. Maybe in "How To's"
PS The last two pics were taken before it took the set.
