« previous next »
Pages: 1 2 3 [4] 5 6

Author Topic: Boo Yew RD  (Read 9262 times)

0 Members and 2 Guests are viewing this topic.

Offline PatM

  • Member
  • Posts: 6,737
Re: Boo Yew RD
« Reply #45 on: July 04, 2020, 04:06:30 pm »
That makes sense since your design is likely identical.
Logged

Offline Selfbowman

  • Member
  • Posts: 3,196
Re: Boo Yew RD
« Reply #46 on: July 04, 2020, 05:00:38 pm »
Yes I noticed that. Pat I learning baby steps here .   Arvin
Logged
Well I'll say!!  Osage is king!!

Offline DC

  • Member
  • Posts: 10,396
Re: Boo Yew RD
« Reply #47 on: July 04, 2020, 05:22:06 pm »
What did that caul look like Arvin?
Logged

Offline Selfbowman

  • Member
  • Posts: 3,196
Re: Boo Yew RD
« Reply #48 on: July 04, 2020, 05:29:42 pm »
This
Logged
Well I'll say!!  Osage is king!!

Offline DC

  • Member
  • Posts: 10,396
Re: Boo Yew RD
« Reply #49 on: July 04, 2020, 06:02:06 pm »
Kinda looks like a curved caul makes a curved FDC and a straight caul makes a straight FDC.
Logged

Offline Selfbowman

  • Member
  • Posts: 3,196
Re: Boo Yew RD
« Reply #50 on: July 04, 2020, 08:31:21 pm »
DC my force draw looks like one half of that caul. The flipped tips at the bottom of the force draw. Never done it full scale but I’m guessing it would be somewhat close.  Arvin
Logged
Well I'll say!!  Osage is king!!

Offline backtowood B2W

  • Member
  • Posts: 574
Re: Boo Yew RD
« Reply #51 on: July 04, 2020, 11:29:11 pm »
DC, I really like your hunt for that number...I´m sure you can do it. Glad you ask about so many things. Many interesting topics which I learned a lot from.
Thanks for doing this ....
Logged

Offline simk

  • Member
  • Posts: 1,162
Re: Boo Yew RD
« Reply #52 on: July 05, 2020, 08:08:27 am »
great work again DC - i once had some glueing problems when did a "belly lam over the handle"...glueing onto the "front side" of wood makes weaker glue joint imho. watch out, my last r/d also was 191fps  ;D
Logged
--- the queen rules ----

Offline DC

  • Member
  • Posts: 10,396
Re: Boo Yew RD
« Reply #53 on: July 05, 2020, 10:12:10 am »
Quote from: simk on July 05, 2020, 08:08:27 am
..glueing onto the "front side" of wood makes weaker glue joint imho. watch out, my last r/d also was 191fps  ;D

I don't understand "front side". Good job on the 191. Are you shooting by hand or did you make a machine. I wonder if anyone is in the 190's without using an RD design. I've managed high 180's with a Molle but the tips were so skinny it gave me the willies to brace it.
Logged

Offline simk

  • Member
  • Posts: 1,162
Re: Boo Yew RD
« Reply #54 on: July 05, 2020, 02:58:49 pm »
DC, normally you glue laminates parallel and also parallel to the grain - when you glue the belly lam up the riser block the glue joint runs up, across the grain. this gluejoint is weaker than same with parallel grain. ...and there is a lot of stress there. imho.
R/D design just works fine on wood as a material i think. I do shoot by hand, but only draw 26" as I dont get consistency on 28". The machine in our clubhouse still/again is under construction  ;D
Can't find anymore this fdc but have one from a similar bow (same caul) might also post the bow
Logged
--- the queen rules ----

Offline bassman

  • Member
  • Posts: 962
Re: Boo Yew RD
« Reply #55 on: July 05, 2020, 03:27:12 pm »
DC, you are for sure a very serious bow builder. I hope some day you reach your goal. In the mean time it is fun watching your posts, and the speed you get on your all wood bows are awesome.I am thinking you spend a lot of time in your shop.
Logged

Offline PatM

  • Member
  • Posts: 6,737
Re: Boo Yew RD
« Reply #56 on: July 05, 2020, 03:34:44 pm »
A reflexed static will almost certainly shoot faster for at least a  few shots.
Logged

Offline willie

  • Member
  • Posts: 3,300
Re: Boo Yew RD
« Reply #57 on: July 05, 2020, 03:43:35 pm »
Quote from: PatM on July 05, 2020, 03:34:44 pm
A reflexed static will almost certainly shoot faster for at least a  few shots.

PatM,  the tips on Dons bows seem to be static.
can you post a pic of a limb you consider "relexed static" please?
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Boo Yew RD
« Reply #58 on: July 05, 2020, 05:12:47 pm »
Quote from: simk on July 05, 2020, 02:58:49 pm
DC, normally you glue laminates parallel and also parallel to the grain - when you glue the belly lam up the riser block the glue joint runs up, across the grain. this gluejoint is weaker than same with parallel grain. ...and there is a lot of stress there. imho.
R/D design just works fine on wood as a material i think. I do shoot by hand, but only draw 26" as I dont get consistency on 28". The machine in our clubhouse still/again is under construction  ;D
Can't find anymore this fdc but have one from a similar bow (same caul) might also post the bow

You got 191 with a 26" draw????

Oh thanks I understand the end grain thing. What are you going to do. It has to be glued like that. Trust in epoxy ;D
« Last Edit: July 05, 2020, 05:22:05 pm by DC »
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Boo Yew RD
« Reply #59 on: July 05, 2020, 05:19:54 pm »
Quote from: bassman on July 05, 2020, 03:27:12 pm
DC, you are for sure a very serious bow builder. I hope some day you reach your goal. In the mean time it is fun watching your posts, and the speed you get on your all wood bows are awesome.I am thinking you spend a lot of time in your shop.

Thanks Bassman. I spend most of my time in the shop. I babysit my grandson in the summer so I don't get as much time out there then. I'm pretty much a hermit so social things don't get it the way and I'm blessed with a very tolerant wife. When I pick a hobby I kind of get obsessed and don't do anything else.
Logged
Pages: 1 2 3 [4] 5 6
« previous next »