« previous next »
Pages: [1]

Author Topic: Heat treat question  (Read 1618 times)

0 Members and 1 Guest are viewing this topic.

Offline DC

  • Member
  • Posts: 10,396
Heat treat question
« on: July 04, 2020, 05:26:02 pm »
Say I'm heating a board from one side. That side is 400° and the other side is 200°. Does it stand to reason that the very middle of the board will be 300°?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Heat treat question
« Reply #1 on: July 04, 2020, 05:41:33 pm »
Somewhere in there.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline mmattockx

  • Member
  • Posts: 984
Re: Heat treat question
« Reply #2 on: July 04, 2020, 06:26:12 pm »
Quote from: DC on July 04, 2020, 05:26:02 pm
Say I'm heating a board from one side. That side is 400° and the other side is 200°. Does it stand to reason that the very middle of the board will be 300°?

If that is your steady state condition, then I think you are correct and it is 300 in the middle. If the temps are not steady then it may not be correct.


Mark
Logged

Offline Selfbowman

  • Member
  • Posts: 3,161
Re: Heat treat question
« Reply #3 on: July 04, 2020, 08:37:07 pm »
Quote from: mmattockx on July 04, 2020, 06:26:12 pm
Quote from: DC on July 04, 2020, 05:26:02 pm
Say I'm heating a board from one side. That side is 400° and the other side is 200°. Does it stand to reason that the very middle of the board will be 300°?

If that is your steady state condition, then I think you are correct and it is 300 in the middle. If the temps are not steady then it may not be correct.

Diddo and how do we know that?? Spent some hours on the heat bench . That’s what it takes to just get close. Arvin
Mark
Logged
Well I'll say!!  Osage is king!!
Pages: [1]
« previous next »