Author Topic: tree id please  (Read 890 times)

0 Members and 1 Guest are viewing this topic.

Offline paulc

  • Member
  • Posts: 660
tree id please
« on: May 19, 2020, 10:19:04 am »
I am guessing some kind of birch..? 

Thanks in advance!  Paul

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: tree id please
« Reply #1 on: May 19, 2020, 10:45:58 am »
River birch(Betula nigra)
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline paulc

  • Member
  • Posts: 660
Re: tree id please
« Reply #2 on: May 19, 2020, 11:24:40 am »
Thanks!

Offline paulc

  • Member
  • Posts: 660
Re: tree id please
« Reply #3 on: May 19, 2020, 01:44:38 pm »
If the grain behaves I ought to get 5 staves out of it....there does seem to be a bit of twist in the grain but since I am new to this side of things I really don't know what I am talking about.

Thanks city of Savannah for the free wood!

Paul

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: tree id please
« Reply #4 on: May 19, 2020, 02:07:37 pm »
I believe river birch is only marginal bow wood so design your bows accordingly.
 Savannah is my hometown.   :OK
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline paulc

  • Member
  • Posts: 660
Re: tree id please
« Reply #5 on: May 19, 2020, 02:34:40 pm »
I figure I have 6 months to find a design that will work.

Wife and I are in the process of moving from Tybee into town...3 evacuations/2 floods in 4 yrs is too much for us out here on the island.  Work provides a house on slab as part of job-no longer worth it :-)  By end of month I will be commuting like so many other folks but it is a beautiful ride out onto the island.

Paul

Offline hoosierf

  • Member
  • Posts: 492
Re: tree id please
« Reply #6 on: May 19, 2020, 03:26:01 pm »
I made a river birch. 2” wide and 72” long with a straight limb profile to a 10” taper to the tips. Turned out good. Mine was arrow straight trunk wood using the ring right under the bark.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: tree id please
« Reply #7 on: May 19, 2020, 03:35:04 pm »
 Paul, a lot more traffic there since I left in 1978. We lived in Bluffton for 12 years after that so went to Savannah regularly. We moved up here to Brevard in 1990. Been back a few times. Always love seeing Savannah but not the traffic or heat and humidity. I spent most of my summers at friends house at the N E corner of 12th Street and Butler Ave on Tybee, my surf bum days.  8)
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline paulc

  • Member
  • Posts: 660
Re: tree id please
« Reply #8 on: May 19, 2020, 03:53:24 pm »
We saw 4th of July level traffic this past weekend...traffic was backed up from Lazaretto creek bridge almost all the way to where islands expressway heads right/north towards Savannah(7 miles maybe?)....lots of scared residents out here with covid running around and crowds like that...40% of tybee pop is high risk older adults.....and it wasn't a holiday weekend.  Cover your cough y'all! :-)

fwiw, Paul

Offline willie

  • Member
  • Posts: 3,268
Re: tree id please
« Reply #9 on: May 19, 2020, 03:56:29 pm »
birch here does not follow the grain well when split. a split will run off near a knot and keep going and not back around. not so much a sign of twisted grain, as most birch bows are usually made from sawn staves.