Author Topic: Rendezvous Bow - Completed  (Read 15969 times)

0 Members and 1 Guest are viewing this topic.

Offline Gordon

  • Member
  • Posts: 3,299
Re: Rendezvous Bow - Completed
« Reply #90 on: April 26, 2020, 08:43:03 pm »
Thank you silent sniper.

Rakua, Thank you for the compliment. There was quite a bit of twist after I spliced the billets but I got most of that out with dry heat (see page 2). Also I'm pretty careful about following the contours of the back including variations from side to side.

Thank you for the nice words WhistlingBadger.
Gordon

Offline Aaron H

  • Member
  • Posts: 3,437
Re: Rendezvous Bow - Completed
« Reply #91 on: April 28, 2020, 11:15:28 am »
Great build Gordon.  Very well done all around, your finish work is top notch.

Tell me about your needle you use for lacing...

Offline Gordon

  • Member
  • Posts: 3,299
Re: Rendezvous Bow - Completed
« Reply #92 on: April 28, 2020, 02:11:22 pm »
Hey Aaron, thank you for the compliment. I use 2-pronged leather lacing needles for the handle work. You can get these from any leather supplies outlet.
Gordon

Offline Aaron H

  • Member
  • Posts: 3,437
Re: Rendezvous Bow - Completed
« Reply #93 on: April 29, 2020, 10:56:56 am »
Thank you

Offline rps3

  • Member
  • Posts: 1,514
Re: Rendezvous Bow - Completed
« Reply #94 on: April 29, 2020, 11:01:28 am »
Beautiful.

Offline Hans H

  • Member
  • Posts: 420
Re: Rendezvous Bow - Completed
« Reply #95 on: April 29, 2020, 01:45:18 pm »
very nice, thanks for sharing
Hans
Hans,      Bavaria, Germany

Offline backtowood B2W

  • Member
  • Posts: 574
Re: Rendezvous Bow - Completed
« Reply #96 on: April 29, 2020, 02:04:04 pm »
Very nice build along, incredible work, and very nice looking bow.
Looking forward for a similar project and can definitely use this.
Thank you!
BTW

Offline cutty

  • Member
  • Posts: 64
Re: Rendezvous Bow - Completed
« Reply #97 on: April 29, 2020, 04:03:05 pm »
Beautiful all around. She will love it. Is the knife made from a bastard file?

Offline paulsemp

  • Member
  • Posts: 1,918
Re: Rendezvous Bow - Completed
« Reply #98 on: April 29, 2020, 04:33:26 pm »
very well done!

Offline Gordon

  • Member
  • Posts: 3,299
Re: Rendezvous Bow - Completed
« Reply #99 on: April 29, 2020, 07:07:36 pm »
Thank you rps3.

Thank you for the kind words Hans.

Thank you BTW, I appreciate the compliment.

Thank you cutty. The throwing knife is forged from a farriers rasp, but that is not my work.

Thank you Paul.
Gordon

Offline Dvshunter

  • Member
  • Posts: 1,402
Re: Rendezvous Bow - Completed
« Reply #100 on: April 29, 2020, 07:53:49 pm »
Beautiful bow! Excellent workmanship as always.
"There is a natural mystic blowing through the air; if you listen carefully now you will hear." Robert Nesta Marley

Offline vinemaplebows

  • Member
  • Posts: 1,419
Re: Rendezvous Bow - Completed
« Reply #101 on: April 29, 2020, 10:52:59 pm »
Nice bow Gordon! That lower limb wood looks like it twists? I have some plum, not sure exactly which specific plum. Does plum stand for cutting through grain like vine maple?

Brian
Debating is an intellectual exchange of differing views...with no winners.

Offline Gordon

  • Member
  • Posts: 3,299
Re: Rendezvous Bow - Completed
« Reply #102 on: April 30, 2020, 10:10:52 am »
Thank you for your nice words Dvs.

Brian, The lower limb has a lot of grain twist, much more than I initially thought. I have made several bows from plum and have been impressed with the quality of the wood. I don't know that anything quite stacks up to vine maple for durability, but plum is probably pretty close.
Gordon

Offline vinemaplebows

  • Member
  • Posts: 1,419
Re: Rendezvous Bow - Completed
« Reply #103 on: April 30, 2020, 06:08:18 pm »
Thanks for the input, good to see you at the craft again!
Debating is an intellectual exchange of differing views...with no winners.

Offline Gordon

  • Member
  • Posts: 3,299
Re: Rendezvous Bow - Completed
« Reply #104 on: April 30, 2020, 07:39:21 pm »
Hey Brian. Many of the people that I met in black powder/Rendezvous circles are really interested in one of a kind primitives bow. When you go to a Rendezvous or mountain man show, you will meet black smiths, blade makers, weavers, soap makers, clothing makers, hat makers, gun smiths, horn makers, tent makers…if it can be used in Rendezvous you will find someone that will make want you want or trade you for it. But if you want a primitive bow, you will likely have to make it yourself – good luck finding a bowyer who is tuned into the Rendezvous scene. I’ve donated/traded most of my surplus bows away and will make bows for friends who are willing to accept whatever I make (and so far no one has turned me down), but I’m not interested in getting into the bow making business because I have too many other things I’d rather do.  So for you fellas that want to turn a few bucks making bows, you might want to check out the black powder/mountain man Rendezvous scene – I think there is an untapped source of demand for the stuff that we love to do here. And who knows you might like doing the black powder mountain man thing – it’s kind of addictive.
Gordon