« previous next »
Pages: [1]

Author Topic: Piano key ivory  (Read 1622 times)

0 Members and 1 Guest are viewing this topic.

Offline Mesophilic

  • Member
  • Posts: 876
Piano key ivory
« on: April 15, 2020, 04:39:40 pm »
My neighbor is hauling off an old piano to the dump.  I popped the ivory off the keys, cause no sense in wasting good legal ivory.

Aside from inlay, anyone have some other interesting ideas I could do with it?
Logged
Trying is the first step to failure
-Homer Simpson-

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Piano key ivory
« Reply #1 on: April 15, 2020, 04:41:55 pm »
I used them in tip overlays
Logged
I started out with nothin' and I still got most of it left

Offline Stoker

  • Member
  • Posts: 1,729
Re: Piano key ivory
« Reply #2 on: April 15, 2020, 04:52:28 pm »
Don't forget the Ebony keys. 8)
Thanks
Leroy



Logged
Bacon is food DUCT tape - Cipriano

Offline Handforged

  • Member
  • Posts: 243
  • Limestone Canyon Forge, Monarch MT.
Re: Piano key ivory
« Reply #3 on: April 15, 2020, 05:28:56 pm »
scrimshaw? Not sure how thick the ivory is on some of those older pianos. Some had solid keys while others were just a thin veneer about 1/16" thick.
Logged
At the forge- 406-781-9098

Offline Mesophilic

  • Member
  • Posts: 876
Re: Piano key ivory
« Reply #4 on: April 15, 2020, 06:31:37 pm »
These are the thin veneers, as you described about 1/16" thick.
Logged
Trying is the first step to failure
-Homer Simpson-

Offline EdwardS

  • Member
  • Posts: 229
Re: Piano key ivory
« Reply #5 on: April 15, 2020, 07:37:28 pm »
It's beautiful for scrimshaw.  It's also tough enough for strike plates and even nock inserts.  Ivory to me is a joy to work.
Logged

Offline Mesophilic

  • Member
  • Posts: 876
Re: Piano key ivory
« Reply #6 on: April 15, 2020, 07:53:01 pm »
Didn't even think about strike plates...thanks!

I'm guessing they used hide glue back in the day because a brief soak in warm water and the little bits of wood stuck on to them slide right off.   I also noticed that they used some kind of toothing tool because the glue sides are definatly ridged.
Logged
Trying is the first step to failure
-Homer Simpson-

Offline EdwardS

  • Member
  • Posts: 229
Re: Piano key ivory
« Reply #7 on: April 15, 2020, 08:21:55 pm »
Yeah, everything on an old piano is hide glue.  Those ebony keys are awesome too.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Piano key ivory
« Reply #8 on: April 15, 2020, 09:36:52 pm »
Spines for reinforced self nocks on arrows.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Mesophilic

  • Member
  • Posts: 876
Re: Piano key ivory
« Reply #9 on: April 16, 2020, 01:21:36 pm »
I have some long skinnier pieces from the back part of the keys...would work great for nock reinforcements.  The veneers were laid down in two pieces for most of the keys.
Logged
Trying is the first step to failure
-Homer Simpson-

Offline JEB

  • Member
  • Posts: 1,735
Re: Piano key ivory
« Reply #10 on: April 16, 2020, 03:04:29 pm »
Just wunderin? When did they quit using ivory?  Every once in awhile you see a craigslist add for a free piano. I would take it and scrap it out just for the keys. Would love to foot some arrow  self nocks with ivory.
Logged
Pages: [1]
« previous next »