« previous next »
Pages: [1]

Author Topic: Cut horns for trade.  (Read 4698 times)

0 Members and 1 Guest are viewing this topic.

Offline Mafort

  • Member
  • Posts: 424
Cut horns for trade.
« on: January 15, 2020, 02:57:27 pm »
Lookin to see what’s out there. I have two pairs of horns the shortest  is 50+CM and the longest is 70CM. I’m looking at anything that you may have for trade.
Logged

Offline backwoodsguy

  • Member
  • Posts: 55
Re: Cut horns for trade.
« Reply #1 on: January 16, 2020, 07:09:21 am »
So are you saying that a "pair" are 19.7 inches and 27.56 inches tip to tip? That would mean the horns would be around 10- 14 inches long. Good sizes for powder horns.
Logged

Offline Mafort

  • Member
  • Posts: 424
Re: Cut horns for trade.
« Reply #2 on: January 16, 2020, 11:09:07 am »
These are already cut.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Cut horns for trade.
« Reply #3 on: January 16, 2020, 11:13:59 am »
Cow horn or water buff?
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Mafort

  • Member
  • Posts: 424
Re: Cut horns for trade.
« Reply #4 on: January 16, 2020, 12:42:01 pm »
Water buffalo.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Cut horns for trade.
« Reply #5 on: January 16, 2020, 01:25:51 pm »
Full horn or slabs?
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Mafort

  • Member
  • Posts: 424
Re: Cut horns for trade.
« Reply #6 on: January 16, 2020, 01:48:02 pm »
Quote from: Pat B on January 16, 2020, 01:25:51 pm
Full horn or slabs?

It’s the outside curve of the horn used to make horn bellies.
Logged

Offline High-Desert

  • Member
  • Posts: 876
Re: Cut horns for trade.
« Reply #7 on: January 18, 2020, 11:54:34 am »
Anything you are looking for? I have staves, a few vine maple and yew
Logged
Eric

Offline Mafort

  • Member
  • Posts: 424
Re: Cut horns for trade.
« Reply #8 on: January 18, 2020, 09:45:22 pm »
I’d actually like a finish it yourself kind of stave made from yew in an English longbow style. Could you do that?
Logged

Offline High-Desert

  • Member
  • Posts: 876
Re: Cut horns for trade.
« Reply #9 on: January 19, 2020, 10:01:21 am »
How finished are you looking for? Finish as in you finish tillering it, or, finish as you put a finish on it? Right now I have a English long bow that is finished tillering, and has tallow beeswax on it. It still needs horn or antler nocks put on. Is that too finished?
Logged
Eric

Offline Mafort

  • Member
  • Posts: 424
Re: Cut horns for trade.
« Reply #10 on: January 19, 2020, 10:21:18 am »
I was thinking like a square blank that needs to be shaped and tillered. So I can try tillering it myself.
Logged

Offline High-Desert

  • Member
  • Posts: 876
Re: Cut horns for trade.
« Reply #11 on: January 19, 2020, 11:01:25 am »
ok, i will take a look and see what I have that I can make a square blank out of
Logged
Eric

Offline Mafort

  • Member
  • Posts: 424
Re: Cut horns for trade.
« Reply #12 on: January 19, 2020, 01:10:43 pm »
If it’s a hassle then we can trade for yew or vine maple. I haven’t had the privilege of working with either here in kentucky. It’s not one of the native woods
Logged

Offline High-Desert

  • Member
  • Posts: 876
Re: Cut horns for trade.
« Reply #13 on: January 19, 2020, 02:15:31 pm »
Do you have a certain length you are looking for?
Logged
Eric
Pages: [1]
« previous next »