Best method to harvest verdigris from copper?

[Hawkdancer]

Any ideas on harvesting the verdigris from copper neatly and safely?  I am thinking the dust is a bit toxic.  I haven't tried any method yet, but plan to wear a dust mask if I do it with a wire brush or scraper.
Hawkdancer

[GlisGlis]

I had no first hand experience so i googled
If you search for "verdigris diy instructables" you will find a neat solution
basically you put copper scraps in a closed glass container with acetic acid (or vinegar that has a lower acid concentration)
after a week or so you have your verdigris in solution
You let your liquid evaporate and you have your green powder
Read the article. Many more interesting information there

[sleek]

Is it for a dye or stain?

[Mo_coon-catcher]

I’ve done the method glisglis said, and it works very well. I used scraps left over from wiring. It’s a good use for the leftovers.
Just strip it, throw a bunch in the jar and fill with vinegar.once the liquid is dark blue-green you pour it in a flat shallow dish and let it evaporate, scrape the powder into a jar and it’s good to go.

Kyle

[ohma2]

So what do you use it for?

[Hawkdancer]

My plan is to copy the Mary Rose type binding that WillS wrote up.  Green is one of my favorite colors!
Sliante!  I have quite a bit of copper scrap on hand.  Since I also have a lot f vinegar, I will start a jar!
Hawkdancer