Author Topic: Hackberry for backing?  (Read 1439 times)

0 Members and 1 Guest are viewing this topic.

Offline Mo_coon-catcher

  • Member
  • Posts: 1,347
Hackberry for backing?
« on: September 11, 2019, 10:32:46 am »
I’m curious if anyone has messed with hackberry for a backing material. I helped TimBo to process a large hackberry tree, in addition to one I cut a couple weeks before that. We got several staves that split out as squares about 4”x4” or bigger and about 6-6.5’ long. I’m thinking real hard about rippinga couple of these I to slats on the table saw to use in future projects for backing, since I’ve heard it’s supposed to be tough in tension. It may not be as stiff and snappy as hickory, but I feel it’ll go well with some softer belly materials. What do you all think?

Kyle
« Last Edit: September 11, 2019, 08:06:46 pm by Mo_coon-catcher »

Offline Bayou Ben

  • Member
  • Posts: 661
Re: Hackberry for backing?
« Reply #1 on: September 11, 2019, 10:41:16 am »
I think it would be great for softer belly materials.  I thought the same thing when I processed a hackberry tree a few months ago.  I didn't have a chance to try it yet, but I do plan to. 

Offline willie

  • Member
  • Posts: 3,268
Re: Hackberry for backing?
« Reply #2 on: September 11, 2019, 05:40:50 pm »
why not with even a harder belly materiel? especially some woods that do well with a trapped back

Offline Hamish

  • Member
  • Posts: 1,557
Re: Hackberry for backing?
« Reply #3 on: September 11, 2019, 05:57:51 pm »
Give it a go. Its a bit like elm, and elm used to be used as backs in Europe before hickory was readily available.

Offline TimBo

  • Member
  • Posts: 1,047
Re: Hackberry for backing?
« Reply #4 on: September 11, 2019, 06:00:41 pm »
Hey, I recognize that hackberry...I got a couple more belly splits and kerfed a wide one into two staves, and have another big pile of wood to deal with now!

Offline dylanholderman

  • Member
  • Posts: 787
Re: Hackberry for backing?
« Reply #5 on: September 11, 2019, 07:27:09 pm »
Ask around and see if anyone you know has a jointer, I think it could make getting started easier.

Offline Mo_coon-catcher

  • Member
  • Posts: 1,347
Re: Hackberry for backing?
« Reply #6 on: September 11, 2019, 08:11:34 pm »
There were an awesful lot of staves in that tree. Was there many more left in that log chunk that was left that night?
With it being a fairly low mass wood I figured it would pair better with light stuff. But it’ll more than likely be fine with harder belly material. I can get enough I’ll try it on lots of things.
Luckily my friends father had a cabinet shop with a nice jointer and table saw I can use to cut up a few of these better hackberry blocks.

Kyle

Offline Hawkdancer

  • Member
  • Posts: 5,040
Re: Hackberry for backing?
« Reply #7 on: September 12, 2019, 12:14:29 am »
I think you guys need to stay out of trouble with so much wood to play with!  Wouldn't know a hackberry if it fell on me )-w(!  Unless those knarly tree in the the Buckhorn Skinners meeting area are hackberry - the landowner says they were knarly since she was little and she is older than me and has lived there all her life.  Sounds like a worthwhile experiment, how would the HB work with Osage?
Missed you and TimBo at MoJam, but the heat index flat kicked my rearend!
Hawkdancer
Life is far too serious to be taken that way!
Jerry