« previous next »
Pages: [1]

Author Topic: Vice repairs  (Read 2347 times)

0 Members and 1 Guest are viewing this topic.

Offline DLH

  • Member
  • Posts: 400
Vice repairs
« on: May 31, 2019, 10:47:07 am »
I have found this vice I think it’s a Wilton bullet nose. It is cracked in the throat and won’t tighten. Do you think it can be welded and fixed? Best I can find is if it’s cast iron it don’t lend itself to welding very well. I would like to have a bullet nose and this seems to be the cheapest option.

Logged

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: Vice repairs
« Reply #1 on: May 31, 2019, 11:05:37 am »
Daniel...a good welder can weld a casting.  I dought it's "cast iron"  I'd be concerned how much heat goes into it and warpage. 
Logged
Integrity is doing the right thing when no one is looking

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Vice repairs
« Reply #2 on: May 31, 2019, 12:09:46 pm »
That can be welded. My concern would be how much the heat distorts the threads. Its worth a shot for the right price.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline DLH

  • Member
  • Posts: 400
Re: Vice repairs
« Reply #3 on: May 31, 2019, 01:23:22 pm »
The guy wants $80 bucks for it which is more than I'm willing to pay but he's been sitting on it for awhile now. I think he may come down eventually what do you think would be a decent offer for it? I hate to do $80 if its not even serviceable yet. What kind of welding would you do some DC rods and a car battery?
Logged

Offline Eric Krewson

  • Member
  • Posts: 5,432
Re: Vice repairs
« Reply #4 on: May 31, 2019, 03:30:09 pm »
According to a friend who welds up cast iron pots and pans, he heats them red hot with a torch. and then welds them.
Logged

Offline KHalverson

  • Member
  • Posts: 758
Re: Vice repairs
« Reply #5 on: May 31, 2019, 06:40:01 pm »
in my opinion that crack can be fixed.
it can be ground out heated  and stick welded with high nickel rod or tig brazed with a high nickel or stainless rod.
$80 sounds a bit steep for a broken vise that's scrap unless someone has the skill or pays someone who has the skill to properly repair.

Logged
Pages: [1]
« previous next »