Primitive Archer
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Help
Search
Calendar
Login
Register
Primitive Archer
»
Main Discussion Area
»
Bows
»
Wood prep
« previous
next »
Print
Pages: [
1
]
Author
Topic: Wood prep (Read 1139 times)
0 Members and 1 Guest are viewing this topic.
Woodely
Member
Posts: 381
Wood prep
«
on:
April 09, 2019, 02:10:31 pm »
What can you use to clean oily woods besides Acetone.
Logged
"Doing bad work is an exercise in futility, but honestly making mistakes is trying your best."
Jakesnyder
Member
Posts: 458
Re: Wood prep
«
Reply #1 on:
April 09, 2019, 02:41:40 pm »
Dawn dishsoap is what I've always used
Logged
Pat B
Administrator
Member
Posts: 37,637
Re: Wood prep
«
Reply #2 on:
April 09, 2019, 03:03:01 pm »
When I do sinew backed bows I use Dawn dish soap, scrub with warm water and rinse with boiling water. If you are just gluing a wood back to the bow I just give both glue surfaces a good sanding brush off the dust and butter both surfaces with glue.
Logged
Make the most of all that comes and the least of all that goes! Pat Brennan Brevard, NC
Eric Krewson
Member
Posts: 5,435
Re: Wood prep
«
Reply #3 on:
April 10, 2019, 06:19:11 am »
Back when I thought it was necessary I used a dilute lye solution on osage. After reading the Dean Torges writings on the subject and his finding that it wasn't necessary on American woods I quit degreasing 20 years ago and haven't had a failure since. I do tooth the glue surface for backing and sinew.
Logged
SLIMBOB
Member
Posts: 3,759
Deplorable Slim
Re: Wood prep
«
Reply #4 on:
April 10, 2019, 06:22:21 am »
We did all of our very early bows the same with lye. That was just accepted as necessary.
Logged
Liberty, In God We Trust, E Pluribus Unum. Distinctly American Values.
Print
Pages: [
1
]
« previous
next »
Primitive Archer
»
Main Discussion Area
»
Bows
»
Wood prep