« previous next »
Pages: 1 [2]

Author Topic: Wood Identification  (Read 3317 times)

0 Members and 2 Guests are viewing this topic.

Offline IrishJay

  • Member
  • Posts: 442
Re: Wood Identification
« Reply #15 on: January 06, 2019, 10:37:44 am »
All split out. 3 good staves to and the skinny runaway on the far right.

Logged
"The best camouflage pattern is called, 'Sit down and be quiet!' Your grandpa hunted deer in a red plaid coat, think about that for a second." - Fred Bear

Offline DC

  • Member
  • Posts: 10,396
Re: Wood Identification
« Reply #16 on: January 06, 2019, 11:06:39 am »
You got lucky :)
Logged

Offline IrishJay

  • Member
  • Posts: 442
Re: Wood Identification
« Reply #17 on: January 06, 2019, 11:17:31 am »
Yeah I'm pretty happy with how straight it split, with the exception of the one runaway. And I still might be able to get a light weight shorty out of that.
Logged
"The best camouflage pattern is called, 'Sit down and be quiet!' Your grandpa hunted deer in a red plaid coat, think about that for a second." - Fred Bear

Offline IrishJay

  • Member
  • Posts: 442
Re: Wood Identification
« Reply #18 on: January 06, 2019, 12:07:50 pm »
Debarked and ends sealed on the first stage, 0 knots or imperfections on the back, 2.25" across the back at the narrowest point. That walnut odor really comes out when debarking.



Logged
"The best camouflage pattern is called, 'Sit down and be quiet!' Your grandpa hunted deer in a red plaid coat, think about that for a second." - Fred Bear

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: Wood Identification
« Reply #19 on: January 06, 2019, 02:46:36 pm »
Now you can draw the bow on the back, leaving the tips and handle area wide and cut it out. Bind it to a form and let it dry. If you can, bring it in the house and in a month or so you could start working it down.
 The odor is a very good way to ID black locust. It's very distinctive.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline IrishJay

  • Member
  • Posts: 442
Re: Wood Identification
« Reply #20 on: January 06, 2019, 04:03:50 pm »
That's the plan. Once I get'em all debarked I'm going to rough them out to about 2.25" wide, and take some of the excess off the bellies to speed up the seasoning process. I have my eye on a nice white ash, and a decent piece of silver maple that will hopefully joining these stages soon. Trying to get a good collection of staves drying so that down the road I'll have a good stock to work from.
Logged
"The best camouflage pattern is called, 'Sit down and be quiet!' Your grandpa hunted deer in a red plaid coat, think about that for a second." - Fred Bear

Offline bassman

  • Member
  • Posts: 962
Re: Wood Identification
« Reply #21 on: January 06, 2019, 07:02:05 pm »
That is Black walnut.I have made a lot of bows with black Walnut saplings. It has a thick outer growth ring that is very  strong .I debark them green ,and ax,and rasp to 80 percent so I can get it shaped on a form with 4 inch back set. Take the twists out of it, and line the tips up with the riser heating ,and clamping.Let it dry in my basement. Give it a good belly heat treat before you take it off the form.Then tiller ,and heat treat one or two more times. It can take a lot of set ,so heat treating is important.Makes a light smooth drawing bow. Make it wide pyramid style. Will make a good self bow. Over looked as a good self bow wood, but built right works fine. Wood will ding easy. It is a soft hard wood.I have made them short, but my best bows were 62 inches long, 2 inches wide coming off the fades to 5 eight,s at the tips.Good luck.
Logged
Pages: 1 [2]
« previous next »