« previous next »
Pages: 1 2 [3] 4

Author Topic: Heat bending and limb set  (Read 7076 times)

0 Members and 2 Guests are viewing this topic.

Offline IrishJay

  • Member
  • Posts: 442
Re: Heat bending and limb set
« Reply #30 on: December 23, 2018, 12:16:31 pm »
Brad, because the linen I have isn't long enough to back the whole bow I'll probably end up with 2 pieces that start at the limb tips and meet in the middle, with a third piece lapped over top that spans the midsection.
Logged
"The best camouflage pattern is called, 'Sit down and be quiet!' Your grandpa hunted deer in a red plaid coat, think about that for a second." - Fred Bear

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Heat bending and limb set
« Reply #31 on: December 23, 2018, 12:22:08 pm »
well ok,, can you go to an art store and get a scrap piece of linen canvas,,I dont know where you live or if that might be a realistic source for you,, but linen canvas is very durable,, and would make a nice backing,,
« Last Edit: December 23, 2018, 12:28:22 pm by bradsmith2010 »
Logged

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Heat bending and limb set
« Reply #32 on: December 23, 2018, 12:29:31 pm »
or just double what you described to have two layers
Logged

Offline IrishJay

  • Member
  • Posts: 442
Re: Heat bending and limb set
« Reply #33 on: December 23, 2018, 03:11:45 pm »
So here's what I ended up doing, my linen was about 6" shorter the the bow ttt. So I ran one strip from one tip and it came within 6" of the other tip. Then i ran a strip the opposite way over top of this first strip. So now everything but the outer most 6" of each limb had 2 layers. Outer most 6" has only one layer. Then I laid the 3rd piece on centered on the bow so it reaches to within 3" of each limb tip.

So over all, our to 6" from the tips is 3 layers. 6" to 3" is 2 layers and 3" to tip is one layer.
Logged
"The best camouflage pattern is called, 'Sit down and be quiet!' Your grandpa hunted deer in a red plaid coat, think about that for a second." - Fred Bear

Offline IrishJay

  • Member
  • Posts: 442
Re: Heat bending and limb set
« Reply #34 on: December 23, 2018, 03:25:56 pm »


Logged
"The best camouflage pattern is called, 'Sit down and be quiet!' Your grandpa hunted deer in a red plaid coat, think about that for a second." - Fred Bear

Offline IrishJay

  • Member
  • Posts: 442
Re: Heat bending and limb set
« Reply #35 on: December 23, 2018, 08:50:20 pm »
Resin is cured and I've got some of the edge of the backing sanded down. With 3 layers of linen the sanding is slow going, but hopefully it will result in a durable bow. Backing will get one more coat of resin after tillering is complete to give it a smooth finish.

Logged
"The best camouflage pattern is called, 'Sit down and be quiet!' Your grandpa hunted deer in a red plaid coat, think about that for a second." - Fred Bear

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,634
Re: Heat bending and limb set
« Reply #36 on: December 23, 2018, 11:28:41 pm »
I hope that backing doesn't overpower the belly and cause frets. At least with TB glue you get some give and I think 3 layers of linen is overkill.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline IrishJay

  • Member
  • Posts: 442
Re: Heat bending and limb set
« Reply #37 on: December 24, 2018, 09:59:28 am »
I'll find out when I start exercising the limbs during tiller. My guess is that if working backs like sinew or glass dont over power natural wood bellies I think I'll be ok. I got it braced from floor tiller prebacking, took about 35lbs to get it braced. So if I go slow I should have plenty of meat to get my 40lb final tilled on this one.
Logged
"The best camouflage pattern is called, 'Sit down and be quiet!' Your grandpa hunted deer in a red plaid coat, think about that for a second." - Fred Bear

Offline Morgan

  • Member
  • Posts: 1,028
Re: Heat bending and limb set
« Reply #38 on: December 24, 2018, 10:27:10 am »
Quote from: IrishJay on December 24, 2018, 09:59:28 am
My guess is that if working backs like sinew or glass dont over power natural wood bellies I think I'll be ok.

But......they do.  Good luck! I hope you get a good shooter and like the fact that you’re forging right on after that first failure.
Logged

Offline IrishJay

  • Member
  • Posts: 442
Re: Heat bending and limb set
« Reply #39 on: December 24, 2018, 11:06:38 am »
And second, and third failures. It's been a bumpy road but I'm learning and moving forward.
Logged
"The best camouflage pattern is called, 'Sit down and be quiet!' Your grandpa hunted deer in a red plaid coat, think about that for a second." - Fred Bear

Offline ohma2

  • Member
  • Posts: 960
Re: Heat bending and limb set
« Reply #40 on: December 24, 2018, 02:04:51 pm »
Why all the backing if ,as you state, you have a nice unviolated back?
Logged

Offline IrishJay

  • Member
  • Posts: 442
Re: Heat bending and limb set
« Reply #41 on: December 24, 2018, 02:23:41 pm »
Everything I've read on black cherry recommends backing it.
Logged
"The best camouflage pattern is called, 'Sit down and be quiet!' Your grandpa hunted deer in a red plaid coat, think about that for a second." - Fred Bear

Offline IrishJay

  • Member
  • Posts: 442
Re: Heat bending and limb set
« Reply #42 on: December 24, 2018, 09:21:10 pm »
I had to spend a bit more time chasing an even tiller on this one than I did on the board bow, but it's my first stave bow to get to full draw without issue. Tillers looks a little off at brace, but looks better at draw. I think I'm going to have to live with it because I dont want to take anymore weight off. Set was not excessive, the stave had a fair amount of deflex to start with. Thinking about adding tip overlays, then it's just a couple more coats of resin on the back and some finish sanding.
Logged
"The best camouflage pattern is called, 'Sit down and be quiet!' Your grandpa hunted deer in a red plaid coat, think about that for a second." - Fred Bear

Offline IrishJay

  • Member
  • Posts: 442
Re: Heat bending and limb set
« Reply #43 on: December 24, 2018, 09:23:10 pm »



Logged
"The best camouflage pattern is called, 'Sit down and be quiet!' Your grandpa hunted deer in a red plaid coat, think about that for a second." - Fred Bear

Offline IrishJay

  • Member
  • Posts: 442
Re: Heat bending and limb set
« Reply #44 on: December 25, 2018, 01:49:43 pm »
I still havent done the finishing work, but I got a nice cedar arrow set for Christmas today and it seemed like a good opportunity to try out both. Put about a dozen arrows through it, no bad sounds, no signs of belly checking. It's my first time shooting a bendy handle so it was a bit different for me, but over all I'm pleased. 
Logged
"The best camouflage pattern is called, 'Sit down and be quiet!' Your grandpa hunted deer in a red plaid coat, think about that for a second." - Fred Bear
Pages: 1 2 [3] 4
« previous next »