Author Topic: Here's something you don't see very often  (Read 1959 times)

0 Members and 1 Guest are viewing this topic.

Offline manysteps

  • Member
  • Posts: 29
Here's something you don't see very often
« on: December 16, 2018, 02:38:18 pm »
Here's a 100% Wenge bow I just finished... figured I'd share since you just don't see them very often, especially unbacked. (shoots great too)

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: Here's something you don't see very often
« Reply #1 on: December 16, 2018, 03:11:42 pm »
Looks like a nice bow but I'd be afraid of the cut out window. Not much meat there.
Can we see a full draw pic?
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Hamish

  • Member
  • Posts: 1,557
Re: Here's something you don't see very often
« Reply #2 on: December 16, 2018, 03:17:10 pm »
Yep, Don't see that very often. Wenge, known to tricky to get a bow out of. Massive cut out shelf. Stacking the odds against yourself, but you pulled off the trick. Well done.

Offline ohma2

  • Member
  • Posts: 960
Re: Here's something you don't see very often
« Reply #3 on: December 17, 2018, 08:47:05 am »
Hope that stays together for for you ,sure is pretty wood.what poundage did you get from it ?

Offline manysteps

  • Member
  • Posts: 29
Re: Here's something you don't see very often
« Reply #4 on: December 17, 2018, 09:02:50 am »
Hope that stays together for for you ,sure is pretty wood.what poundage did you get from it ?

40# @ 28" on this one.

Offline DC

  • Member
  • Posts: 10,396
Re: Here's something you don't see very often
« Reply #5 on: December 17, 2018, 09:13:48 am »
Could we see a picture of the arrow pass from the front or back? Like the archers view? I'm always fascinated to see what you can get away with. Did you reinforce it in any way?

Offline manysteps

  • Member
  • Posts: 29
Re: Here's something you don't see very often
« Reply #6 on: December 17, 2018, 09:18:44 am »
Could we see a picture of the arrow pass from the front or back? Like the archers view? I'm always fascinated to see what you can get away with. Did you reinforce it in any way?

I'll have to see if I can get some more pictures... this bow was built to have the arrow 1/16" off of center. (there's probably more meat there than it looks... the bow is 2" wide)... The only real concern I had with it is I could have used a thicker handle block than I did.

Offline Bayou Ben

  • Member
  • Posts: 661
Re: Here's something you don't see very often
« Reply #7 on: December 17, 2018, 10:02:04 am »
Yeah that's some pretty wood.   Would love to see FD and unbraced.

Offline manysteps

  • Member
  • Posts: 29
Re: Here's something you don't see very often
« Reply #8 on: December 17, 2018, 10:06:20 am »
Yeah that's some pretty wood.   Would love to see FD and unbraced.

I'll try to get some more pictures a little later today when my wife can take the full draw pic... has about 1" of set after shooting and unstringing, settles in to 1/2" or so when rested.

Offline Hawkdancer

  • Member
  • Posts: 5,040
Re: Here's something you don't see very often
« Reply #9 on: December 17, 2018, 10:53:39 am »
Nice work!  Way above my skill level!  I like the color of the wenge wood, and it definitely has a window pass.  I would think it would hold up well at 40#, as wide as it is.  Good luck!
Hawkdancer
Life is far too serious to be taken that way!
Jerry

Offline leonwood

  • Member
  • Posts: 762
    • Leonwood Bows
Re: Here's something you don't see very often
« Reply #10 on: December 17, 2018, 11:26:28 am »
Well done, that stuff is tricky! The sharp edges on the back scare me though because I had lift splinters even in handle sections with that wood  ;D