« previous next »
Pages: [1]

Author Topic: Bberc  (Read 1765 times)

0 Members and 1 Guest are viewing this topic.

Online sleek

  • Member
  • Posts: 6,764
Bberc
« on: October 28, 2018, 02:21:02 pm »
So, total noob style question.  Boo backed erc, hows that combo work? Would it be fine for a short recurve? Is the cedar too soft for a boo back? Would a trapped back be better? Whats an ideal width?
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Bberc
« Reply #1 on: October 28, 2018, 03:26:38 pm »
With a boo backing the bow will be narrow anyway(1 3/8" mol). I think ERC is pretty good in compression even though it is soft, it is a juniper. I think boo/erc would be a good combo. I think I'd make a longer straight bow with kicked up tips but that's just me.
« Last Edit: October 29, 2018, 09:19:56 am by Pat B »
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Badger

  • Member
  • Posts: 8,124
Re: Bberc
« Reply #2 on: October 28, 2018, 04:38:57 pm »
   I don't think any combo works well on a short recurve except sinew. LOL
Logged

Online sleek

  • Member
  • Posts: 6,764
Re: Bberc
« Reply #3 on: October 29, 2018, 05:12:20 am »
Maybe so, but you know me Steve, and im gonna try it. I like my short recurves.
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Bberc
« Reply #4 on: October 29, 2018, 07:10:54 am »
Don't know about Bamboo but Maple or White Ash are both excellent for backing ERC and no doubt Hickory as well, just make sure the ERC has no knots
Logged
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline Bob Barnes

  • Member
  • Posts: 942
Re: Bberc
« Reply #5 on: October 29, 2018, 07:50:55 am »
sleek...I have tried it and ended up with frets.  I decided that Marc was right (again) and used a thin hickory backing with success.  With your gorilla draw length be sure it's long and wide.  Good luck...
Logged
Seems like common sense isn't very common any more...
Pages: [1]
« previous next »