Author Topic: Red oak.  (Read 1349 times)

0 Members and 1 Guest are viewing this topic.

Offline Mafort

  • Member
  • Posts: 424
Red oak.
« on: July 26, 2018, 11:22:09 am »
So I see everywhere that red oak can be used to build a decent bow. Does it work well when necked with hickory and then bamboo??? Was wanting to try it and save a bit of money but I figure I’d stop by and ask.

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Red oak.
« Reply #1 on: July 26, 2018, 12:26:04 pm »
Made many a self-bow from red oak boards and red oak  staves. Jawge
Set Happens!
If you ain't breakin' you ain't makin!

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Red oak.
« Reply #2 on: July 26, 2018, 02:56:47 pm »
I've backed red oak with hickory successfully but I wouldn't even attempt a boo backing for red oak.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Mafort

  • Member
  • Posts: 424
Re: Red oak.
« Reply #3 on: July 26, 2018, 03:29:53 pm »
I've backed red oak with hickory successfully but I wouldn't even attempt a boo backing for red oak.

why not???

Offline bushboy

  • Member
  • Posts: 2,256
Re: Red oak.
« Reply #4 on: July 26, 2018, 03:37:59 pm »
Red oak is somewhat low in compression so when mated with a very high tension material like bamboo the belly cells will most likely colapse ,take on a lots of set and go onto frett.a thin hard maple back and a red oak belly would be my choice.
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline Mafort

  • Member
  • Posts: 424
Re: Red oak.
« Reply #5 on: July 26, 2018, 03:40:04 pm »
Red oak is somewhat low in compression so when mated with a very high tension material like bamboo the belly cells will most likely colapse ,take on a lots of set and go onto frett.a thin hard maple back and a red oak belly would be my choice.

what about a hickory backing???

Offline bushboy

  • Member
  • Posts: 2,256
Re: Red oak.
« Reply #6 on: July 26, 2018, 03:48:53 pm »
I would try to keep the hickory backing as thin as possible within reason.say 1/16th or a little more.
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline Mafort

  • Member
  • Posts: 424
Re: Red oak.
« Reply #7 on: July 26, 2018, 04:31:54 pm »
I would try to keep the hickory backing as thin as possible within reason.say 1/16th or a little more.

so 1/8 is too thick?

Offline bushboy

  • Member
  • Posts: 2,256
Re: Red oak.
« Reply #8 on: July 26, 2018, 04:57:34 pm »
I/8 th will work
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Red oak.
« Reply #9 on: July 26, 2018, 07:51:29 pm »
I've backed red oak with linen, silk and burlap. Jawge
Set Happens!
If you ain't breakin' you ain't makin!