Author Topic: Flat bow Tillering  (Read 9392 times)

0 Members and 2 Guests are viewing this topic.

Offline Nicole

  • Member
  • Posts: 29
Re: Flat bow Tillering
« Reply #45 on: July 01, 2018, 01:55:01 am »
I'm curious what you guys think of my handle design. Most factory bows have pistol grip shapes, which don't fit my hand at all. im quite small. well at least vertically.

Offline Nicole

  • Member
  • Posts: 29
Re: Flat bow Tillering
« Reply #46 on: July 01, 2018, 02:13:50 am »
Form looks very good, Nicole. Have someone watch you shoot and note where the arrow is compared to the back of the bow. Measure it to the throat of the nock or bottom of the groove. That's your draw length.

As for arrows going left that is indicative of over spined arrows for a righty.
Your bow is light. Leave the arrows full width and buy the lightest arrows you can find.
Go to my site and read this-

http://traditionalarchery101.com/selfbowcare.html

Jawge

The lowest spine i can find are 5/16  30-35 are those ok?