Hafting broad heads & stone points

[Hawkdancer]

What or is there a best way to orient a broad head or stone point?  Parallel to the string or the cock feather, I.e. 90 degrees to the bow & string?  I looked for a thread, but didn't come across one!  Thanks,   Hawkdancer

[Danzn Bar]

I don't think it really matters more of a personal preference .  I like mine horizontal or 90 deg to the string.
DBar

[Pat B]

I cut a bandsaw cut for self nocks and trade and stone points so they are both cut vertical. I really don't think it matters. With commercial glue on points I mount them where they spin true so they can be any which a way.

[Danzn Bar]

Yea....some people really get into it with the right or left helical fletch.......hell it really doesn't matter at 15 yards.
DBar

[Hawkdancer]

Guess I'll do a set of each and see which works best!  Not sure I'll buy a left helical clamp for the Bitzenberg, though.  If I get within 15 yards, the critter will hear me breathing! 20 and I may be all right!   Thanks!  Any body else who wants to weigh in, let's hear from you, too
Hawkdancer

[Ed Brooks]

My wife likes to hang some of my stone tipped arrows on the wall. So I mount mine (shoot shafts) the same as the string. Planed arrows, always same as string, across the grain is how I do mine. Ed

[Mesophilic]

I mount them with the blade going from 2 to 8 o'clock.  Tried the other ways and they screw up my aiming for some strange reason.  When I tried 12 to 6 o'clock my elevation is all screwed up and likewise 3 to 9 o'clock my windage gets screwed up.  I'm not sure if shooting right handed is the factor but can't do 11 to 5 or 10 to 4 o'clock mountings at all.

[Tracker0721]

If I’m doing planed/store bought arrow shafts I cut the nock perpendicular to the grain and do the same for the stone point. Don’t wanna split a shaft! On shoot shafts I keep both cut the same just because. I used to shoot arrows that were short enough that I’d draw till the back of the broad head/ stone point would tough my finger, so that set up was needed there too.