Author Topic: Arrow spine calculator  (Read 12785 times)

0 Members and 1 Guest are viewing this topic.

onemississipp

  • Guest
Arrow spine calculator
« on: August 25, 2007, 09:15:56 pm »
There is a link to a chart I built where you can adjust it to any length shaft, just change the shaft length number to whatever you like...26.75, 32.25, ect.......

http://onemississipp.googlepages.com/spineweight.htm

This way you can make a spine tester the length of the shafts you shoot.
« Last Edit: August 25, 2007, 09:20:23 pm by onemississipp »

simb

  • Guest
Re: Arrow spine calculator
« Reply #1 on: March 24, 2008, 06:53:29 am »
Hi,

I'm new here and found this link while reading all the nice contents here and therefore just wanted to point to my calculator for wooden shafts also: http://www.bogenblog.de/index.php?/pages/spine-rechner.html

The page is in German, but I tried to translate the calculator itself into English. Just click on the button with the British flag.
I would be happy to get your feedback.

simb

Offline richpierce

  • Member
  • Posts: 278
Re: Arrow spine calculator
« Reply #2 on: March 24, 2008, 04:27:50 pm »
Simb, will this work for arrows that are tapered as well?

simb

  • Guest
Re: Arrow spine calculator
« Reply #3 on: March 24, 2008, 05:48:47 pm »
will this work for arrows that are tapered as well?
hmm, not sure, but never heard that tapered arrows have a different static spine then non-tapered. I would appreciate any information about it.