Author Topic: Thick D section HHB bows  (Read 1191 times)

0 Members and 1 Guest are viewing this topic.

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Thick D section HHB bows
« on: January 14, 2018, 09:49:30 am »
I had some people ask me before about issues you can have when heat-treating thick bows of dense wood species like HHB.  One of the major problems is moisture even with well seasoned wood.  What happens is moisture gets pushed ahead and build up to the point where the wood will start to split from the pressure build-up.  I was lately heat-treating a thick D section warbow and decided to take a picture of this for posting here.  You can see a couple inches ahead of the heat-treated area how the wood is starting to swell.  At this point you have to stop and wait for awhile.

Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline Philipp A

  • Member
  • Posts: 302
Re: Thick D section HHB bows
« Reply #1 on: January 14, 2018, 10:05:09 am »
great pic Marc! Do you move the heat gun back and forth when over an area and how long do you usually stay in one spot?

Offline DC

  • Member
  • Posts: 10,396
Re: Thick D section HHB bows
« Reply #2 on: January 14, 2018, 10:36:21 am »
When you say wait for a while are you talking hours, days? Do you hold the gun farther away on thicker pieces?

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Thick D section HHB bows
« Reply #3 on: January 14, 2018, 01:41:16 pm »
Some people play the gun back an forth, I do not.  I give 1 spot 5~10 minutes, depends on the temp inside my shop.

I give it a day.  I hold the heat-gun the same distance regardless
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com