« previous next »
Pages: 1 [2] 3

Author Topic: Trying the Footed Route  (Read 9834 times)

0 Members and 2 Guests are viewing this topic.

Offline DC

  • Member
  • Posts: 10,396
Re: Trying the Footed Route
« Reply #15 on: December 14, 2017, 12:35:36 pm »
Quote from: willie on December 14, 2017, 11:56:09 am
DC I know this is from the other thread, but are the chrysals right where the clamp in the pic is?

Quote
Apparently the chrysals happen just behind the tip because he repaired them by footing the arrows. Has anyone heard of this. How low does your spine have to be so that the arrow bends far enough to chrysal? Or have I got this all wrong?

They crysalled before he footed them. The footing was a repair to get rid of the chrysals.
Logged

Offline Aaron H

  • Member
  • Posts: 3,437
Re: Trying the Footed Route
« Reply #16 on: December 14, 2017, 12:40:25 pm »
Those are gonna be sweet Mr Mike
Logged

Offline willie

  • Member
  • Posts: 3,268
Re: Trying the Footed Route
« Reply #17 on: December 14, 2017, 12:51:10 pm »
DC,  a chrysal is a compression failure, but maybe on the arrow it was not from bending, but from hitting too hard?

Knoll, I think somewhere I read about making the tapers concave or hollow ground, if you were going to force them into the kerf method
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Trying the Footed Route
« Reply #18 on: December 14, 2017, 01:57:22 pm »
Very cool start, Mikey.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Knoll

  • Member
  • Posts: 3,016
  • Mikey
Re: Trying the Footed Route
« Reply #19 on: December 14, 2017, 05:15:54 pm »
Got started on a shooting board to turn these squares into rounds.
It's a couple pieces, with each piece chamfered to form half of the "trough" that will hold the shaft squares.
Got 'em stuck together now.
I hate waiting for glue to cure . . . . . .

Logged
... alone in distant woods or fields, in unpretending sproutlands or pastures tracked by rabbits, even in a bleak and, to most, cheerless day .... .  I suppose that this value, in my case, is equivalent to what others get by churchgoing & prayer.  Hank Thoreau, 1857

Offline Knoll

  • Member
  • Posts: 3,016
  • Mikey
Re: Trying the Footed Route
« Reply #20 on: December 18, 2017, 08:19:49 am »
First shaft is planed down to slightly more than 23/64.


Glue joint has quite the impact on spine measurement. This shaft is measuring 70+ lbs. Shaft from same board, but not footed, measured just 50ish lbs.
Logged
... alone in distant woods or fields, in unpretending sproutlands or pastures tracked by rabbits, even in a bleak and, to most, cheerless day .... .  I suppose that this value, in my case, is equivalent to what others get by churchgoing & prayer.  Hank Thoreau, 1857

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Trying the Footed Route
« Reply #21 on: December 18, 2017, 07:02:23 pm »
It did'nt with mine using purple heart or osage.I made mine parallel width though with the shaft.You'll have to take her down some then to get 50#.Personally I like as narrow a shaft as I can get off these self bows.
Logged
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline Knoll

  • Member
  • Posts: 3,016
  • Mikey
Re: Trying the Footed Route
« Reply #22 on: December 19, 2017, 10:19:32 am »
At approx 23/64 dia and 32" length, ended up at 41# spine. That is gonna work well for me.
Re earlier spine measurement, have hunch that I messed up measurement.
Found that hand-planing squares into shafts was easy. Making a shooting board as aid to planing was significant help.
Now gluing footers to some more shafts.
« Last Edit: December 19, 2017, 10:32:17 am by Knoll »
Logged
... alone in distant woods or fields, in unpretending sproutlands or pastures tracked by rabbits, even in a bleak and, to most, cheerless day .... .  I suppose that this value, in my case, is equivalent to what others get by churchgoing & prayer.  Hank Thoreau, 1857

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Trying the Footed Route
« Reply #23 on: December 19, 2017, 01:08:41 pm »
I see.The red alert has been shut off then.As long as your happy that's what counts.Some oily finish should bring the contrast out nice,or even any kind of finish.Show some pics when your done.They go for pretty good money if bought made like that.
I usually just reduce mine with a file to 8 facets.Then a little spinning in the drill with some stiff 60 grit down to 220 gets me where I like mine.I still seem to lose them just as quick as a regular plain jane shafts though.....lol.
Logged
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: Trying the Footed Route
« Reply #24 on: December 19, 2017, 05:34:58 pm »
Quote from: BowEd on December 19, 2017, 01:08:41 pm
I still seem to lose them just as quick as a regular plain jane shafts though.....lol.

I think this is the major reason I have not gone off the deep end and made shafts like this!!!

Keep posting pics as you go, this is good stuff!

Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Knoll

  • Member
  • Posts: 3,016
  • Mikey
Re: Trying the Footed Route
« Reply #25 on: December 23, 2017, 11:17:29 am »
First 4 are finished.

They are 23/64. Spine measurements are 46, 45, 41, and 40. There are 5 more to do. This has been fun project and way easier than anticipated.

I cut some red oak, maple, and more tulip poplar squares. Some of those are completed.


Totally off topic, but also working on some river cane shafts that came from certain gentleman in KY.


This will likely be the end of arrow shaft work until after holidays. The Wife just pushed a "get ready for family to descend" to-do list under my nose.
Merry Christmas to all!!
« Last Edit: December 23, 2017, 09:59:43 pm by Knoll »
Logged
... alone in distant woods or fields, in unpretending sproutlands or pastures tracked by rabbits, even in a bleak and, to most, cheerless day .... .  I suppose that this value, in my case, is equivalent to what others get by churchgoing & prayer.  Hank Thoreau, 1857

Offline DC

  • Member
  • Posts: 10,396
Re: Trying the Footed Route
« Reply #26 on: December 23, 2017, 01:15:20 pm »
When I did this I was also really surprized how easy it was to get a good glue joint. I guess because the pieces are so thin they just bend to fit. The only part i found a bit tough was trying to get it straight with the clamps blocking your view.
Logged

Offline Knoll

  • Member
  • Posts: 3,016
  • Mikey
Re: Trying the Footed Route
« Reply #27 on: December 23, 2017, 01:21:30 pm »
Quote from: DC on December 23, 2017, 01:15:20 pm
When I did this I was also really surprized how easy it was to get a good glue joint. I guess because the pieces are so thin they just bend to fit. The only part i found a bit tough was trying to get it straight with the clamps blocking your view.

I concur.   ;D
Logged
... alone in distant woods or fields, in unpretending sproutlands or pastures tracked by rabbits, even in a bleak and, to most, cheerless day .... .  I suppose that this value, in my case, is equivalent to what others get by churchgoing & prayer.  Hank Thoreau, 1857

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: Trying the Footed Route
« Reply #28 on: December 23, 2017, 08:24:50 pm »
I wonder if having the foot piece in a pot of hot water would also help them flex, match up tighter, and resist splitting?
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,198
  • if you have to ask you wouldn't understand ,Tenn.
Re: Trying the Footed Route
« Reply #29 on: December 24, 2017, 08:59:47 am »
They are looking good Knoll, very nice shafts. Never done any myself but have had several gifted to me and they seem to shoot really great, I think because as Ed said the weight forward effect. ;)
Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good
Pages: 1 [2] 3
« previous next »