Author Topic: Shark Bite  (Read 3007 times)

0 Members and 1 Guest are viewing this topic.

Offline bjrogg

  • Member
  • Posts: 11,016
  • Cedar Pond
Shark Bite
« on: September 03, 2017, 01:10:41 pm »
Staying out of the water won't keep this one away. It's a tri flow Obsidian blade I knapped. Got both the obsidian and cholla from Jeb. I got the rosebud wood I believe it was called, from Dylan Holderman in supply trade last year. Hopefully it shows up on first picture where it got its name. The tri flow looks like like a shark ready to bite.
Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline bjrogg

  • Member
  • Posts: 11,016
  • Cedar Pond
Re: Shark Bite
« Reply #1 on: September 03, 2017, 01:13:04 pm »
Two more
Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline selfbow joe

  • Member
  • Posts: 996
  • 1-812-344-1590
Re: Shark Bite
« Reply #2 on: September 03, 2017, 07:37:11 pm »
Nice looking knife.the handle looks good.

Offline Trapper Rob

  • Member
  • Posts: 3,719
Re: Shark Bite
« Reply #3 on: September 03, 2017, 08:41:01 pm »
BJ looks really nice.

Offline JEB

  • Member
  • Posts: 1,735
Re: Shark Bite
« Reply #4 on: September 04, 2017, 04:31:50 am »
Very nice looking knife.  I like the looks of that handle and the butt cap sets it off.

Offline bjrogg

  • Member
  • Posts: 11,016
  • Cedar Pond
Re: Shark Bite
« Reply #5 on: September 04, 2017, 06:16:58 am »
Thanks Joe and Rob.
Thanks Jeb, I do really like that cholla to. I've got one more stick of it left. Thanks so much for it. I may have to see if we can work a trade out for some more if you get some.
Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline Hawkdancer

  • Member
  • Posts: 5,040
Re: Shark Bite
« Reply #6 on: September 04, 2017, 12:18:44 pm »
Real nice work on that knife!  I like the cholla, will have to find some.
Hawkdancer
Life is far too serious to be taken that way!
Jerry

Offline bjrogg

  • Member
  • Posts: 11,016
  • Cedar Pond
Re: Shark Bite
« Reply #7 on: September 05, 2017, 05:59:16 am »
Thanks Hawkdancer, I like the cholla to. Funny thing is nobody around here has seen it before, so they all wonder " how did you do that" lol. Maybe I should just say it top secret, but very time consuming.
Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline Knapper

  • Member
  • Posts: 1,057
  • David Atnip
Re: Shark Bite
« Reply #8 on: September 05, 2017, 12:26:40 pm »
 :OK
Ad Dare Servire
PM104250

Offline Hawkdancer

  • Member
  • Posts: 5,040
Re: Shark Bite
« Reply #9 on: September 05, 2017, 01:39:08 pm »
Thanks Hawkdancer, I like the cholla to. Funny thing is nobody around here has seen it before, so they all wonder " how did you do that" lol. Maybe I should just say it top secret, but very time consuming.
Bjrogg
Sort of like my "top secret" wood rivets  >:D. Ply me with enough uisge beathea, and maybe you can pry the secret out of me :OK.
I have a spring steel blade the would look nice with a cholla handle.  Did you seal that in with pitch?
Hawkdancer
Life is far too serious to be taken that way!
Jerry

Offline bjrogg

  • Member
  • Posts: 11,016
  • Cedar Pond
Re: Shark Bite
« Reply #10 on: September 05, 2017, 02:46:38 pm »
No Hawkdancer, I actually even used jb weld to glue on button on and some type of two part pig putty to halvt blade. Usually I halvt blade with pitch glue. I filed cholla down to fit my hand and blade then sanded it. Then I wiped on some English Walnut stain, signed it and three coats of tru-oil.
Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline Zuma

  • Member
  • Posts: 4,324
Re: Shark Bite
« Reply #11 on: September 05, 2017, 07:41:55 pm »
Slice me a hunk of that Lope BJ  >:D
Take that baby to The Shark Tank and use it lol.
Zuma
If you are a good detective the past is at your feet. The future belongs to Faith.

Offline YosemiteBen

  • Member
  • Posts: 1,952
Re: Shark Bite
« Reply #12 on: September 07, 2017, 01:34:47 am »
purty!