« previous next »
Pages: [1]

Author Topic: Tacky smooth-on  (Read 1412 times)

0 Members and 1 Guest are viewing this topic.

Offline Eric Krewson

  • Member
  • Posts: 5,432
Tacky smooth-on
« on: May 01, 2017, 08:39:37 am »
Abandoning Unibond because of issues and I bought some smooth-on to try. A couple of days ago I glued on some nock overlays with it. I mixed equal parts by weight for the glue-up. What squeezed out is as hard as a rock but still feels a little tacky to the touch. Is this normal? I put the bow blank in my drying box at 100 degrees overnight but the excess glue still has a bit of tackiness to it.
Logged

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Tacky smooth-on
« Reply #1 on: May 01, 2017, 08:50:12 am »
I've seen that too and the other way too.Not tacky.When tacky maybe it was'nt mixed enough.
Logged
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline Bob Barnes

  • Member
  • Posts: 942
Re: Tacky smooth-on
« Reply #2 on: May 01, 2017, 09:14:49 am »
I'll be watching this thread Eric... I have lots of bamboo and osage to glue and was about to buy some unibond, since it seems to be the go-to glue these days... it stinks that we can't get urac any more...
Logged
Seems like common sense isn't very common any more...

Offline PatM

  • Member
  • Posts: 6,737
Re: Tacky smooth-on
« Reply #3 on: May 01, 2017, 10:02:24 am »
It seems like it's more likely to be amine blush if the squeeze out itself is rigid. Amine blush is fairly common and certain conditions exacerbate it.
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: Tacky smooth-on
« Reply #4 on: May 01, 2017, 12:16:59 pm »
Haven't had that problem but it says you can go 2 to 1 and i have been going closer to that than 1 to 1
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Tacky smooth-on
« Reply #5 on: May 01, 2017, 12:18:42 pm »
I don't even measure or weigh.I eye ball it and hav'nt had it ever fail me yet.Been using it for 8+ years.
Logged
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline simson

  • Member
  • Posts: 2,310
  • stonehill-primitive-bows
    • stonehill-primitive-bows
Re: Tacky smooth-on
« Reply #6 on: May 01, 2017, 01:38:03 pm »
I use other epoxi, but had the same mistake. For me I noticed it was a thing of mixing, I do it now at twice as long as before - and it is good now.
Logged
Simon
Bavaria, Germany
Pages: [1]
« previous next »