« previous next »
Pages: [1]

Author Topic: Osage with knots  (Read 1152 times)

0 Members and 1 Guest are viewing this topic.

Offline blafleur

  • Member
  • Posts: 8
Osage with knots
« on: April 06, 2017, 08:54:31 am »
My third bow attempt (first 2 were ash), and first of Osage.  I love the knot with hole it has, but concerned about it's location. The stave is 71", and the knot will end up about mid limb.  Is this feasible? If so, any special considerations other than following the curvy grain?  If I were to cut off the knot, the stave would be 61".

Logged

Offline blafleur

  • Member
  • Posts: 8
Re: Osage with knots
« Reply #1 on: April 06, 2017, 08:55:17 am »
closer view of the knot.

Logged

Offline blafleur

  • Member
  • Posts: 8
Re: Osage with knots
« Reply #2 on: April 06, 2017, 08:56:31 am »
Side view.  Another issue this rookie will have to deal with is this reflex curve on this end only.

Logged

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Osage with knots
« Reply #3 on: April 06, 2017, 09:15:52 am »
That's doable leaving it on if you want a longer bow.Looks like you left plenty on both sides of the knot to finish it.
Logged
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline DC

  • Member
  • Posts: 10,396
Re: Osage with knots
« Reply #4 on: April 06, 2017, 11:26:56 am »
Are those layout lines or checks at the tip? Layout I think. Try to keep the knot close to  the center(width wise) of the limb.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Osage with knots
« Reply #5 on: April 06, 2017, 12:02:21 pm »
Do what they said.  ;)
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline blafleur

  • Member
  • Posts: 8
Re: Osage with knots
« Reply #6 on: April 06, 2017, 12:22:52 pm »
Thanks, folks.  DC, those are checks.  The way they're even spaced, I think I'll be able to layout right between them.
Logged
Pages: [1]
« previous next »