Level of noise (decibels) on string release?

[cool_98_555]

Hello everyone,

I just thought it would be interesting to do a test on the actual noise level of the release of a bow and compare it with numbers to another release, perhaps using different arrows of different weights or different string silencers.  I don't have a decibel meter to measure it, but I wonder if there is an app that will measure decibels....I have to check on that.  Anyway, I thought it would be interesting to see the numbers for different setups.  Would be a good resource for tuning in before hunting.

[gfugal]

That sounds awsome. I'm sure there is an app out there that can do it. Keep us updated.

[justsomedude]

DB Meter won't tell you as much as a frequency/spectrum analyzer.  And you will want to be in a quiet room to record. A phone mic won't give great results though

[cool_98_555]

I didn't think of that.  Good point I'll have to remember to do that
 

[Stick Bender]

I never really worried about string realease noise as much the noise the bow makes during drawing the arrow in a hunting situation but any of my primitive bows are far quitter then my FG recurve I have found the better the tiller the less noise the bow makes less energy left in the bow Im assuming in hunting situations was your concern .

[crooketarrow]

 GOOD RELEASE AND HEAVY ARROWS