« previous next »
Pages: [1]

Author Topic: Should I fret over this?  (Read 2526 times)

0 Members and 1 Guest are viewing this topic.

Offline Whiskeyjet

  • Member
  • Posts: 115
Should I fret over this?
« on: February 25, 2017, 04:19:49 pm »
I was shooting in my first bow...noticed these marks while taking pictures. Do you guys think these are the shellac cracking or are they compression fractures? Thanks!
Logged

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Should I fret over this?
« Reply #1 on: February 25, 2017, 04:22:29 pm »
if its on the belly probably compression fractures,,
Logged

Offline Whiskeyjet

  • Member
  • Posts: 115
Re: Should I fret over this?
« Reply #2 on: February 25, 2017, 04:29:40 pm »
Yes it is the belly
Logged

Offline bushboy

  • Member
  • Posts: 2,256
Re: Should I fret over this?
« Reply #3 on: February 25, 2017, 05:19:43 pm »
hard to see!if it's a fret you will feel a little ridge like tectonic plates colliding.
Logged
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: Should I fret over this?
« Reply #4 on: February 25, 2017, 05:22:50 pm »
They sure look like compression failure frets.

Now stop worrying about it, shoot the bow unto death as you build the next one.
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline gfugal

  • Member
  • Posts: 746
Re: Should I fret over this?
« Reply #5 on: February 25, 2017, 06:05:48 pm »
Yeah it's compression damage. I wouldn't worry though. What's done is done, and it can still serve you for a while. It might eventually break but to quote monte python "I'm not dead yet". The only way you could fix it is to reduce the weight of the entire bow scraping down those damaged cells, but I'm guessing you like the weight where it's at. 
Logged
Greg,
No risk, no gain. Expand the mold and try new things.

Offline PatM

  • Member
  • Posts: 6,737
Re: Should I fret over this?
« Reply #6 on: February 25, 2017, 06:12:44 pm »
How narrow and rounded is the belly?
Logged

Offline bushboy

  • Member
  • Posts: 2,256
Re: Should I fret over this?
« Reply #7 on: February 25, 2017, 06:20:49 pm »
Been there ,done that!post a full draw pic,pls!
Logged
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline Whiskeyjet

  • Member
  • Posts: 115
Re: Should I fret over this?
« Reply #8 on: February 25, 2017, 06:45:35 pm »
Quote from: PatM on February 25, 2017, 06:12:44 pm
How narrow and rounded is the belly?
It's 1 3/4 wide tapering at 2/3 down to 5/8 at the tips. The belly is rounded but not like an ELB more like rounded corners.
Logged

Offline Stick Bender

  • Member
  • Posts: 2,003
Re: Should I fret over this?
« Reply #9 on: February 25, 2017, 07:09:28 pm »
+1 been there too it's a kick in the gut but happens I learned a lot from mine doing that !
Logged
If you fear failure you will never Try !

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Should I fret over this?
« Reply #10 on: February 26, 2017, 11:40:38 am »
I think it would prolong the life of the bow,, if you reduce the weight and leave that area a bit stiff,,
Logged

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Should I fret over this?
« Reply #11 on: February 26, 2017, 03:29:33 pm »
It's chrysals.
It's bending too much in that area. Leave that area alone and retiiler the limb.
Reduce  the other limb too match.
In addition, a rawhide patch glued on may help.
Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline Springbuck

  • Member
  • Posts: 1,545
Re: Should I fret over this?
« Reply #12 on: March 01, 2017, 07:40:05 pm »
What the heck kind of wood is that?  How long is it?

Just from the dimensions, I bet it's bending too much inn the middle, like George said.
Logged
Pages: [1]
« previous next »