Author Topic: Bending yew  (Read 4322 times)

0 Members and 1 Guest are viewing this topic.

Offline Gordon

  • Member
  • Posts: 3,299
Bending yew
« on: March 09, 2008, 08:00:39 pm »
Okay, what is the secret to bending yew? I'm trying to mildly recurve the tips of the Western Community bow and steam doesn't seem to do a thing.  ??? Do you have to boil this stuff?
Gordon

Offline Gordon

  • Member
  • Posts: 3,299
Re: Bending yew
« Reply #1 on: March 09, 2008, 09:57:50 pm »
Alright, I boiled the tip for about 1 hour and then it bent fine.
Gordon

Offline BryanB

  • Member
  • Posts: 71
Re: Bending yew
« Reply #2 on: March 09, 2008, 10:25:58 pm »
I was going to say boiling for 45-1hr.
Glad it worked out well for you.
Bryan

Offline Badger

  • Member
  • Posts: 8,124
Re: Bending yew
« Reply #3 on: March 09, 2008, 10:49:25 pm »
   I knew you would figure it out gordon, I usually boil yew tips for close to an hour each before bending. Steve

Offline deerhunter97370

  • Member
  • Posts: 374
Re: Bending yew
« Reply #4 on: March 10, 2008, 02:49:34 am »
When you guys say boiling are you sticking the stave inthe water? Joel
Always be ready to: Preach, Pray, or Die. John Wesley

Offline Keenan

  • Member
  • Posts: 4,824
Re: Bending yew
« Reply #5 on: March 10, 2008, 03:17:44 am »
Gordon sorry I didn't get home till late to see this.  Be carefull to not dry them out to fast after boiling. I have had them crack from drying to fast afterward     ;)   ;)Keenan

Offline Gordon

  • Member
  • Posts: 3,299
Re: Bending yew
« Reply #6 on: March 10, 2008, 03:35:52 am »
Keenan, the stave is in my garage - hopefully it will not dry out too fast in there.  How's that character bow of yours doing - I can't wait to see the finished product!
Gordon

Rich Saffold

  • Guest
Re: Bending yew
« Reply #7 on: March 10, 2008, 03:42:28 am »
Deerhunter, That is correct. In this case its probably just the outer limb...

Rich

Offline deerhunter97370

  • Member
  • Posts: 374
Re: Bending yew
« Reply #8 on: March 10, 2008, 03:47:53 am »
Thanks Rich. Joel
Always be ready to: Preach, Pray, or Die. John Wesley

Offline Keenan

  • Member
  • Posts: 4,824
Re: Bending yew
« Reply #9 on: March 10, 2008, 01:18:00 pm »
 The garage in the williamette valley should have no problems with drying to fast ;D ;D Might be dry by june ;D ;D  Keenan

Offline Gordon

  • Member
  • Posts: 3,299
Re: Bending yew
« Reply #10 on: March 10, 2008, 01:45:01 pm »
Yep, that's what I was thinking Keenan  ;D
Gordon

Offline OldBow

  • Member
  • Posts: 2,216
  • I'm just an old retired biology teacher.
Re: Bending yew
« Reply #11 on: March 10, 2008, 02:15:36 pm »
I have found that yew is pretty bendable using my heat gun.
When you're retired, every day is Saturday

Offline adb

  • Member
  • Posts: 5,339
Re: Bending yew
« Reply #12 on: March 10, 2008, 05:11:14 pm »
Gordon,
I've had good luck with steam.