« previous next »
Pages: [1]

Author Topic: Bamboo flaw  (Read 1640 times)

0 Members and 1 Guest are viewing this topic.

Offline Lee Lobbestael

  • Member
  • Posts: 465
Bamboo flaw
« on: January 17, 2017, 06:05:53 pm »
So there is a small gouge in the bamboo of the bamboo osage I just glued up. Not sure if it was there when I got it or not. It is very small just through the top layer or skin of the bamboo. My photo bucket isn't behaving so I can't post a pic. Can bamboo handle a scratch like this? Thanks for all the help on this bow so far. I will definitely post the bow here if and when is done
Logged

Offline Dances with squirrels

  • Member
  • Posts: 1,222
Re: Bamboo flaw
« Reply #1 on: January 17, 2017, 06:20:56 pm »
If it is only scratched through the rind/skin, no problem. If it reaches deeper.... by way of scratch, dent, bruise..... the likelihood that it creates a serious problem is increased... degree depends on severity.
Logged
Straight wood may make a better bow, but crooked wood makes a better bowyer

Offline Lee Lobbestael

  • Member
  • Posts: 465
Re: Bamboo flaw
« Reply #2 on: January 17, 2017, 06:26:18 pm »
Ok good it is just through the skin
Logged

Offline PatM

  • Member
  • Posts: 6,737
Re: Bamboo flaw
« Reply #3 on: January 17, 2017, 06:26:42 pm »
Also depends where in the limb it is.
Logged

Offline Lee Lobbestael

  • Member
  • Posts: 465
Re: Bamboo flaw
« Reply #4 on: January 17, 2017, 07:05:45 pm »
It's about two inches from the fade
Logged

Offline Bryce

  • Global Moderator
  • Member
  • Posts: 3,125
  • Pacific Ghost Longbows
Re: Bamboo flaw
« Reply #5 on: January 17, 2017, 07:08:28 pm »
Just scrape it off when you remove the outer rind
Logged
Clatskanie, Oregon

Offline bubby

  • Member
  • Posts: 11,054
Re: Bamboo flaw
« Reply #6 on: January 17, 2017, 11:17:58 pm »
The way you describe it you should be good
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹
Pages: [1]
« previous next »