« previous next »
Pages: [1]

Author Topic: Would this work for a blunt tip?  (Read 3933 times)

0 Members and 1 Guest are viewing this topic.

Offline osage outlaw

  • Member
  • Posts: 11,962
Would this work for a blunt tip?
« on: January 14, 2017, 04:50:50 pm »
I used duplex nails for the points on a few arrows I'm working on.  I was going to grind the flat head into a point.  Then I had a thought, would this work as a good blunt point for small game like rabbits or squirrels?  There is plenty of weight with the rest of the nail going into the arrow shaft. 




Logged
I started out with nothin' and I still got most of it left

Offline Trapper Rob

  • Member
  • Posts: 3,719
Re: Would this work for a blunt tip?
« Reply #1 on: January 14, 2017, 08:07:05 pm »
Clint do you use silk thread for wrapping & where do you get it at?
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Would this work for a blunt tip?
« Reply #2 on: January 14, 2017, 08:30:12 pm »
Well , it's definitely blunt :D
Logged

Offline Knoll

  • Member
  • Posts: 3,016
  • Mikey
Re: Would this work for a blunt tip?
« Reply #3 on: January 14, 2017, 08:53:05 pm »
Clever idea. Hope ya have opportunity to try 'em out.
Logged
... alone in distant woods or fields, in unpretending sproutlands or pastures tracked by rabbits, even in a bleak and, to most, cheerless day .... .  I suppose that this value, in my case, is equivalent to what others get by churchgoing & prayer.  Hank Thoreau, 1857

Offline JonW

  • Member
  • Posts: 1,906
Re: Would this work for a blunt tip?
« Reply #4 on: January 14, 2017, 08:54:08 pm »
Would prolly work Clint. Seems like maybe not enough surface area but who knows? Have your daughter shoot you in the leg and see if it leaves a bruise  :o
Logged

Offline H Rhodes

  • Member
  • Posts: 2,172
Re: Would this work for a blunt tip?
« Reply #5 on: January 14, 2017, 08:58:52 pm »
I think it will punch a hole more like a field point.  A little washer under that first nail head makes a good blunt.  I like that thread wrap too.
Logged
Howard
Gautier, Mississippi

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Would this work for a blunt tip?
« Reply #6 on: January 14, 2017, 09:04:38 pm »
No way would I want to get hit with one of these.   The thread is heavy duty coat thread.    It's really strong.  I'll soak the wrap behind the point with epoxy.  I wrap the feathers with the same thing and soak that with superglue 2x. 

Howard, good idea on the washer.   I'll remember that next time. 

Logged
I started out with nothin' and I still got most of it left

Offline H Rhodes

  • Member
  • Posts: 2,172
Re: Would this work for a blunt tip?
« Reply #7 on: January 14, 2017, 09:10:06 pm »
Robbie Limerick brought some blunts made with a small washer like that.  They fly better than you think they will, in spite of there lack of an aerodynamic shape and they are hard to lose in the grass. 
Logged
Howard
Gautier, Mississippi

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Would this work for a blunt tip?
« Reply #8 on: January 14, 2017, 09:26:00 pm »
Something like a Cottontail , it will probably punch right through it. I've blown through them with small Judos.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Would this work for a blunt tip?
« Reply #9 on: January 14, 2017, 09:32:54 pm »
I could probably glue one of those 2" mechanical points on an arrow and never leave a scratch on a rabbit  ;D
Logged
I started out with nothin' and I still got most of it left

Offline bubby

  • Member
  • Posts: 11,054
Re: Would this work for a blunt tip?
« Reply #10 on: January 16, 2017, 02:03:59 pm »
I had an arrow to repair, well more than one but i did a little experiment with a full duplex on a fieldpoint target, bounced off everytime, i still think it would blow threw a rabbit or squirrel
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Would this work for a blunt tip?
« Reply #11 on: January 16, 2017, 02:11:39 pm »
I ground them all down to a point except for one.  I'm saving it for the steel drums when I shoot the course with the Dancing Bear  >:D  That flat tip should make a good sound.
Logged
I started out with nothin' and I still got most of it left

Offline loon

  • Member
  • Posts: 1,307
Re: Would this work for a blunt tip?
« Reply #12 on: January 16, 2017, 06:25:45 pm »
Why not a regular nail? I could see that one being annoying to pull out of stuff
Logged

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Would this work for a blunt tip?
« Reply #13 on: January 16, 2017, 06:42:30 pm »
When I epoxied them into the shaft I wasn't planning on leaving them blunt.  I was going to grind the top flat head into a point. 
Logged
I started out with nothin' and I still got most of it left

Offline make-n-break

  • Member
  • Posts: 378
Re: Would this work for a blunt tip?
« Reply #14 on: January 16, 2017, 09:33:18 pm »
Osage.. I've shot some squirrels with that style of point. Worked just fine!
Logged
"When making a bow from board staves you are freeing a thing of dignity from the humiliation of static servitude." -TBB1
Pages: [1]
« previous next »