« previous next »
Pages: [1]

Author Topic: Osage Holmegaard help  (Read 2899 times)

0 Members and 1 Guest are viewing this topic.

Offline Aries

  • Member
  • Posts: 493
Osage Holmegaard help
« on: March 07, 2008, 05:49:27 pm »
I have been reading TBB 4 over the last week and have been inspired to make a replica holmegaard.  I haven't completely grasped the concept of the mass formula, but  know the percs of this stlye. The only wood I have access to at this time is osage, and i was wondering how wide the fades should be, and how far the widdened region should extend before tapering down. I have a few 64" staves that would be suitable, and some 74", 1/4 logs waiting to be debarked. The hugh of the staves is a light yellow(apparently not as dense).   Thanks for the continued advice ;D     Ty
Logged
"If the only tool you have is a hammer,
                   you tend to see every problem as a nail."
                               ~Abraham Maslow

Offline adb

  • Member
  • Posts: 5,339
Re: Osage Holmegaard help
« Reply #1 on: March 07, 2008, 05:53:32 pm »
Hey, Tyrell
Check out my Holmegaard build along, in the How To & Build Along forum. Should answer all your questions. There's lots of pics. Good luck!
Logged
Pages: [1]
« previous next »