Author Topic: Applying snake skins  (Read 1329 times)

0 Members and 1 Guest are viewing this topic.

Offline red hill

  • Member
  • Posts: 37
Applying snake skins
« on: August 27, 2016, 09:11:00 pm »
Hi, guys,
I want to put skins on a hickory selfbow that has been finished with tru-oil. Do I need to remove the finish? Or just apply over the finish?
I plan to use TiteBond to glue the skins on.
Any suggestions?

Stan

Offline TimothyR

  • Member
  • Posts: 658
  • PM110782
Re: Applying snake skins
« Reply #1 on: August 27, 2016, 10:23:08 pm »
Remove the finish. I doubt the glue would stick to oil.
Freedom dies one compromise at a time. III%

Offline red hill

  • Member
  • Posts: 37
Re: Applying snake skins
« Reply #2 on: August 28, 2016, 11:53:43 am »
Thanks, Timothy. I'll do that.
Stan