« previous next »
Pages: [1]

Author Topic: Handle size  (Read 1565 times)

0 Members and 1 Guest are viewing this topic.

Offline DC

  • Member
  • Posts: 10,396
Handle size
« on: July 08, 2016, 12:56:40 pm »
I made a little 45# Yew longbow. The handle is 1"x 1". That's actually the biggest dimensions of the bow. It bends a touch. Is it safe to assume that that size or maybe a tad bigger handle will work for any 45# Yew bow such as a stiff handle ALB. It seems logical but I thought I'd check
Logged

Offline loon

  • Member
  • Posts: 1,307
Re: Handle size
« Reply #1 on: July 09, 2016, 01:04:28 am »
wow nice, how long is it? draw length? pics?

My narrowest handle bow is a glass 50# horsebow has a 3/4" wide handle, 1 1/8" deep, 4" long with each fade 2" long width taper, 4 1/3" thickness taper, tapering to 1 2/3" width. Stiff "riser" area is something like 12" - 15" long
Logged

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Handle size
« Reply #2 on: July 09, 2016, 02:58:00 am »
Go deeper is safer, width isn't so important. 1/8" extra depth makes a lot of difference 1/4" extra is bomb proof.
Del
Logged
Health warning, these posts may contain traces of nut.

Offline Dances with squirrels

  • Member
  • Posts: 1,222
Re: Handle size
« Reply #3 on: July 09, 2016, 09:40:59 am »
If the width AND thickness at the handle is greater than anywhere else in the bow, you should be fine... assuming good sound wood, no violations there, etc.
Logged
Straight wood may make a better bow, but crooked wood makes a better bowyer

Offline DC

  • Member
  • Posts: 10,396
Re: Handle size
« Reply #4 on: July 09, 2016, 12:40:35 pm »
Logged
Pages: [1]
« previous next »