Author Topic: Decrown, knots and rawhide backing.  (Read 1352 times)

0 Members and 1 Guest are viewing this topic.

Offline jandersson

  • Member
  • Posts: 123
Decrown, knots and rawhide backing.
« on: April 10, 2016, 05:47:30 pm »
Good day,
In laws was cleaning their backyard and I found some Buckthorn in the pile. While drying it checked badly and in hopes to try to save the sapling I decrowned it.  While decrowning it I had to go over a bunch of knots and branches as you can see in the so so picture. Is rawhide going to be enough to make the back "safe"?


Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Decrown, knots and rawhide backing.
« Reply #1 on: April 10, 2016, 07:36:27 pm »
no

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: Decrown, knots and rawhide backing.
« Reply #2 on: April 10, 2016, 10:58:38 pm »
Why would you decrown it? Seems like you made it more dangerous rather than saving it.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Weylin

  • Member
  • Posts: 2,296

Offline joachimM

  • Member
  • Posts: 675
  • Good - better - broken
Re: Decrown, knots and rawhide backing.
« Reply #4 on: April 11, 2016, 02:26:36 am »
Buckthorn is rather good in compression so back it with sinew or sisal fibers. Rawhide will prevent splinters lifting but will take rather little of the tension strain, and the bow will hinge at the knots.