Primitive Archer
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Help
Search
Calendar
Login
Register
Primitive Archer
»
Main Discussion Area
»
Bows
»
Heating erc?
« previous
next »
Print
Pages: [
1
]
Author
Topic: Heating erc? (Read 1384 times)
0 Members and 1 Guest are viewing this topic.
TimothyR
Member
Posts: 658
PM110782
Heating erc?
«
on:
March 31, 2016, 02:21:20 pm »
How do heat reflex in erc? And does it require heat treating? My stave is floor tillered and ready. I just need to know how to proceed. Thanks for any help
Logged
Freedom dies one compromise at a time. III%
joachimM
Member
Posts: 675
Good - better - broken
Re: Heating erc?
«
Reply #1 on:
March 31, 2016, 02:37:39 pm »
Of nearly all woods ERC is most elastic in compression. For that reason I wouldn't temper it.
Logged
Aaron H
Member
Posts: 3,437
Re: Heating erc?
«
Reply #2 on:
March 31, 2016, 02:40:57 pm »
I have had very good results with steam bending erc, I just sealed with shellac and steamed the same as I do my Osage, but I don't think it was necessary to steam that long (30 min. per 1/2"). Bent like butter. Never tried tempering
Logged
Springbuck
Member
Posts: 1,545
Re: Heating erc?
«
Reply #3 on:
April 07, 2016, 08:01:00 pm »
I've bent it just slightly with steam and dry heat. I don't think dry heat/tempering improves it much, like other woods. It seemed barely effected, and if anything more brittle.
Logged
Print
Pages: [
1
]
« previous
next »
Primitive Archer
»
Main Discussion Area
»
Bows
»
Heating erc?