« previous next »
Pages: [1]

Author Topic: sinew bow question  (Read 1070 times)

0 Members and 1 Guest are viewing this topic.

Offline Spotted Dog

  • Member
  • Posts: 700
sinew bow question
« on: February 24, 2016, 09:37:52 am »
I posted months ago that I sinew backed a short juniper bow. I have worked it and let it set.
It has gained so much power. How do I reduce the draw on it ? Don't mean to sound dumb
with this question, but it is my first sinewed bow.
Logged
A three strand cord is not easily broken. Ecc.4:12

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: sinew bow question
« Reply #1 on: February 24, 2016, 09:39:59 am »
Tiller the belly like any other bow.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Spotted Dog

  • Member
  • Posts: 700
Re: sinew bow question
« Reply #2 on: February 24, 2016, 10:32:15 am »
That is what I thought, but wanted to be sure.  Thank you.
Logged
A three strand cord is not easily broken. Ecc.4:12

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: sinew bow question
« Reply #3 on: February 24, 2016, 11:18:34 am »
If that doesn't reduce the weight enough you could probably sand the back also but that would be the last resort. I guess you could narrow the bow also.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline simson

  • Member
  • Posts: 2,310
  • stonehill-primitive-bows
    • stonehill-primitive-bows
Re: sinew bow question
« Reply #4 on: February 24, 2016, 12:20:46 pm »
Good advice above.
Post some pics and let us see ...
Logged
Simon
Bavaria, Germany
Pages: [1]
« previous next »