Pat, I'd say I pretty much agree with you on where to take a little wood. It looks like the top is bending a touch more at the fade compared to te bottom limb, and it looks like they could both bend a bit more about where the door casing crosses the upper limb. It looking good.
I've got mine pulled back to 60# at 25". 2 more inches to go. But after getting it there I got the horn overlays glued up and narrowed down to about 3/8", narrowed the back a little, twisted up a string for it with 10 strands D97 and 2 strands B50, and gave it a good sanding with 220 grit. I'm ready to take it out and shoot it in some more and see where it ends up. I'm hoping. Between trapping the back, sanding, and shooting in, that it'llbring it back those extra couple inches. I havnt shot it since it had the fat 3/4" with nocks, I'm excited to see how it shoots now after cleaning it up a bit. See if the little thunk is gone now. Ill try to get a full draw pic today and see if it needs a touch up, I've got some extra poundage if I need to play with the tiller. It should be right about 60# and I'm happy if I can hit 50.
Kyle
