Author Topic: Another Invitational 2016 Bow Trade...  (Read 135313 times)

0 Members and 1 Guest are viewing this topic.

Offline lebhuntfish

  • Member
  • Posts: 3,823
  • If the wood will bend, I'll make it beautiful!
Re: Another Invitational 2016 Bow Trade...
« Reply #510 on: June 19, 2016, 05:55:49 am »
A little update an my trade bow. I think these tips will work!





Patrick
Once an Eagle Scout, always an Eagle Scout!

Missouri, where all the best wood is! Well maybe not the straightest!

Building a bow has been the most rewarding, peaceful, and frustrating things I have ever made with my own two hands!

Offline JonW

  • Member
  • Posts: 1,906
Re: Another Invitational 2016 Bow Trade...
« Reply #511 on: June 19, 2016, 08:59:15 am »
That turned out good Pat. Bob I like the wiggle in that one.

Offline lebhuntfish

  • Member
  • Posts: 3,823
  • If the wood will bend, I'll make it beautiful!
Re: Another Invitational 2016 Bow Trade...
« Reply #512 on: June 19, 2016, 09:10:38 am »
Thanks John!

Well I think I'm going to put some rawhide on the back of the this one. There is a few little spots on the back that I'm not liking. And something is telling me that it needs some rawhide.

Patrick
Once an Eagle Scout, always an Eagle Scout!

Missouri, where all the best wood is! Well maybe not the straightest!

Building a bow has been the most rewarding, peaceful, and frustrating things I have ever made with my own two hands!

Offline Stixnstones

  • Member
  • Posts: 1,695
Re: Another Invitational 2016 Bow Trade...
« Reply #513 on: June 19, 2016, 10:03:13 am »
those overlays look sweet bud.
DevilsBeachSelfbows

Offline Mo_coon-catcher

  • Member
  • Posts: 1,347
Re: Another Invitational 2016 Bow Trade...
« Reply #514 on: June 19, 2016, 04:37:24 pm »
I'm not too happy with the weight that the black licust molle came out at, at 35#. It shoots good, but I'd rather hit closer to my guys desired weight. It was a first in a way for me though. It had one good growth ring for the back, and the rest was about 90% crumbly early growth rings. The ring on ye back of te stave in the picture is the one I used. But the new one I've started is another black locust and it'll be a bendy handle. Right now it's pulling 55# at 13" draw. I'm thinking about flipping the tips when I go to heat treat it later. I want to get it pulled to 20-22" at that weight before heat treating and flipping the tips.

Kyle

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Another Invitational 2016 Bow Trade...
« Reply #515 on: June 19, 2016, 04:50:11 pm »
Very nice job on those tips Pat.
Looks like a very good piece of BL there Mo.
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline JonW

  • Member
  • Posts: 1,906
Re: Another Invitational 2016 Bow Trade...
« Reply #516 on: June 19, 2016, 05:25:32 pm »
Kyle that"s a nice profile for BL.

Offline Knoll

  • Member
  • Posts: 3,016
  • Mikey
Re: Another Invitational 2016 Bow Trade...
« Reply #517 on: June 19, 2016, 06:26:30 pm »
Bob ... that profile looks like one of my fav motorbike roads! Good luck!!
... alone in distant woods or fields, in unpretending sproutlands or pastures tracked by rabbits, even in a bleak and, to most, cheerless day .... .  I suppose that this value, in my case, is equivalent to what others get by churchgoing & prayer.  Hank Thoreau, 1857

Offline lebhuntfish

  • Member
  • Posts: 3,823
  • If the wood will bend, I'll make it beautiful!
Re: Another Invitational 2016 Bow Trade...
« Reply #518 on: June 19, 2016, 10:02:14 pm »
Very nice job on those tips Pat.
Looks like a very good piece of BL there Mo.

those overlays look sweet bud.

Thanks Ed!

Thanks Mike!

Kyle that dude is looking good!

Patrick
Once an Eagle Scout, always an Eagle Scout!

Missouri, where all the best wood is! Well maybe not the straightest!

Building a bow has been the most rewarding, peaceful, and frustrating things I have ever made with my own two hands!

Offline lebhuntfish

  • Member
  • Posts: 3,823
  • If the wood will bend, I'll make it beautiful!
Re: Another Invitational 2016 Bow Trade...
« Reply #519 on: June 19, 2016, 10:11:42 pm »
Here is my hickory stick with the rawhide on. I decided to heat treat it one more time before I backed it. It's thin goat rawhide with hide glue. It was pulling right at 54@20 before the heat and rawhide.
If it holds half the reflex I would be ecstatic! That is if I can get it braced!

Patrick

Once an Eagle Scout, always an Eagle Scout!

Missouri, where all the best wood is! Well maybe not the straightest!

Building a bow has been the most rewarding, peaceful, and frustrating things I have ever made with my own two hands!

Offline Onebowonder

  • Member
  • Posts: 1,495
Re: Another Invitational 2016 Bow Trade...
« Reply #520 on: June 20, 2016, 02:00:47 pm »
Wow!  That's a BIG OLE BUNCH of reflex you put in that thing Patrick!!! It should really spit out an arrow...

OneBow

Offline PaulN/KS

  • Member
  • Posts: 1,388
Re: Another Invitational 2016 Bow Trade...
« Reply #521 on: June 20, 2016, 03:07:00 pm »
Looks pretty cool Patrick, can't wait to see it strung.

Offline Aaron H

  • Member
  • Posts: 3,437
Re: Another Invitational 2016 Bow Trade...
« Reply #522 on: June 20, 2016, 03:27:17 pm »
Looking good Patrick

Offline lebhuntfish

  • Member
  • Posts: 3,823
  • If the wood will bend, I'll make it beautiful!
Re: Another Invitational 2016 Bow Trade...
« Reply #523 on: June 20, 2016, 08:24:43 pm »
Thanks fellas! I talked to JohnW today,  I think stringer grooves might be part of this bow now!

Patrick
Once an Eagle Scout, always an Eagle Scout!

Missouri, where all the best wood is! Well maybe not the straightest!

Building a bow has been the most rewarding, peaceful, and frustrating things I have ever made with my own two hands!

Offline Mo_coon-catcher

  • Member
  • Posts: 1,347
Re: Another Invitational 2016 Bow Trade...
« Reply #524 on: June 20, 2016, 10:35:15 pm »
I can't wait to see how much reflex that bow hold Patrick. It's going to be an awesome arrow flinger.

Kyle