Author Topic: Strightforward wood backing question  (Read 1453 times)

0 Members and 1 Guest are viewing this topic.

Offline Jefficus

  • Member
  • Posts: 28
Strightforward wood backing question
« on: December 26, 2015, 04:43:06 pm »
Understanding of course that different woods are stronger or weaker in tension, would it be right to say that basically any wood that is viable for use as a selfbow can also be used as a backing for one? 

Offline tattoo dave

  • Member
  • Posts: 1,545
  • Rockford, MI
Re: Strightforward wood backing question
« Reply #1 on: December 26, 2015, 04:57:21 pm »
That's a safe bet, providing the grain runs good and straight. Like you said though some woods are stronger than others, so there's some woods that make better combinations than others.

Tattoo Dave
Rockford, MI

Offline Jefficus

  • Member
  • Posts: 28
Re: Strightforward wood backing question
« Reply #2 on: December 26, 2015, 04:59:38 pm »
gotcha, thanks for the confirmation!

Offline PatM

  • Member
  • Posts: 6,737
Re: Strightforward wood backing question
« Reply #3 on: December 26, 2015, 05:34:34 pm »
 Within reason. A marginal selfbow wood used as a backing might not fare as well. You could try backing Ipe with Red Oak for example.

Offline willie

  • Member
  • Posts: 3,268
Re: Strightforward wood backing question
« Reply #4 on: December 26, 2015, 05:37:02 pm »
yes , and maybe even some woods that are not considered good bow woods.

some woods that are considered poor choices for selfbows are woods that do not have good compression qualities, but that says nothing about tension quality.

generally, a wood is considered to have twice or more the tension strength as compression strength