« previous next »
Pages: 1 [2]

Author Topic: Can you do billets without a bandsaw?  (Read 5424 times)

0 Members and 1 Guest are viewing this topic.

Offline sweeney3

  • Member
  • Posts: 277
Re: Can you do billets without a bandsaw?
« Reply #15 on: October 07, 2015, 01:17:44 pm »
I've done precisely nothing with billets, (now army billeting... That's another story) but I suspect you could cut such splices with a coping saw.  It would be fairly slow and tedious, but what isn't in this arena?
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Can you do billets without a bandsaw?
« Reply #16 on: October 07, 2015, 01:34:38 pm »
The secret is in cutting a straight line. If you can cut a straight line with a coping saw you're golden. Myself, I couldn't cut a straight line with a coping saw to save my life. That's why I use a bandsaw, jigs, laser sights and anything else to get that line straight. There are no rules in a knife fight.
Logged

Offline PatM

  • Member
  • Posts: 6,737
Re: Can you do billets without a bandsaw?
« Reply #17 on: October 07, 2015, 01:36:23 pm »
Quote from: sweeney3 on October 07, 2015, 01:17:44 pm
I've done precisely nothing with billets, (now army billeting... That's another story) but I suspect you could cut such splices with a coping saw.  It would be fairly slow and tedious, but what isn't in this arena?
Why not just use the proper type of saw?
Logged

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: Can you do billets without a bandsaw?
« Reply #18 on: October 07, 2015, 10:11:34 pm »
Quote from: PatM on October 05, 2015, 11:23:18 pm
Why on earth not? They didn't design  hand saws to cut crooked lines.

Pffft!  And yet I do it all the time!

Quote from: Del the cat on October 06, 2015, 03:56:00 am
When I was a kid the half crown coin went out of circulation... They were nice looking coins so I sawed one in half the hard way, by hand with a hacksaw to produce two discs one head one tail.

Del

I once draw filed two quarters and silver soldered the two halves together to make a two headed coin. I think I screwed up and dropped it in a PacMan machine.

Quote from: DC on October 07, 2015, 12:42:01 pm
Magic, they had witches then ;D ;D

Please, let's keep religion, politics, and my ex-wife out of this.

Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline bowandarrow473

  • Member
  • Posts: 696
Re: Can you do billets without a bandsaw?
« Reply #19 on: October 07, 2015, 10:24:53 pm »
I'm laughing hard from that last one JW!!
Logged
Whatever you are, be a good one.

Limbit

  • Guest
Re: Can you do billets without a bandsaw?
« Reply #20 on: October 08, 2015, 04:10:54 am »
You can always do a bound and pegged lap-splice. I've never done one exactly like that, but I know a lot of horn bows are made this way.
Logged

Offline LittleBen

  • Member
  • Posts: 190
Re: Can you do billets without a bandsaw?
« Reply #21 on: October 08, 2015, 06:52:43 pm »
I've done a couple with a Japanese Pull saw. You obviously need to be decent with the saw, but it's not very tough. Make the little paper templates and glue them on as a cutting guide and have at it ..... Oh and maybe practice first!?
Logged

Offline stuckinthemud

  • Member
  • Posts: 2,355
    • avenue woodcarving
Re: Can you do billets without a bandsaw?
« Reply #22 on: October 09, 2015, 04:09:03 pm »
Japanese pull saws can be really frustrating to use -the cutting action is one of many short strokes - I still prefer to use a new, disposable hard-point contractors (Jack) saw - put the billet upright in the vice after marking it up accurately, take your time with the saw, constantly check the cut on both sides, clean up with chisel/Shinto/sandpaper, whatever suits your style. Practice always helps though :)
Logged
Pages: 1 [2]
« previous next »