Author Topic: Reflex bracing problems  (Read 3881 times)

0 Members and 1 Guest are viewing this topic.

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Reflex bracing problems
« Reply #15 on: September 27, 2015, 05:03:02 pm »
good point about the over bend to brace,,, that is when the bow is under alot of stress ,, so no need to over do it,, I will have to try a fast flight string for tiller and bracing,, I never realized it was that much different, I am still in the stone ages about some stuff,,,great advice from above,,,, and good luck on your bow,,,, I think you will get it done,  :)

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Reflex bracing problems
« Reply #16 on: September 27, 2015, 05:36:01 pm »
Listen to Will and do as he says.  High reflex will give you a lot of string tension which makes the bow's limbs want to bend sideways unless you go right to full brace
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: Reflex bracing problems
« Reply #17 on: September 28, 2015, 09:13:20 am »
How about some pics.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline sieddy

  • Member
  • Posts: 708
  • Guaranga! :)
Re: Reflex bracing problems
« Reply #18 on: September 28, 2015, 09:55:34 am »
Hi Pat I'm a bit busy these next few days but I'll try to get something sorted this week!  :)
"No man ever broke his bow but another man found a use for the string" Irish proverb

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: Reflex bracing problems
« Reply #19 on: September 28, 2015, 10:03:11 am »
Thanks. That will help us understand the situation more completely.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC