« previous next »
Pages: 1 [2]

Author Topic: Grain runoff on board bow fix  (Read 4345 times)

0 Members and 1 Guest are viewing this topic.

Offline Ryan9273

  • Member
  • Posts: 16
Re: Grain runoff on board bow fix
« Reply #15 on: August 16, 2015, 07:01:46 pm »
At this point the handle is still .75 thick going to leave it as thick as possible to get more lbs out of it.
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: Grain runoff on board bow fix
« Reply #16 on: August 16, 2015, 07:07:25 pm »
Your good like i said if you shorten it to 62" ttt with a bendy handle a 28" draw is easily attained and you won't have a problem making your draw weight barring a major fubar
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Ryan9273

  • Member
  • Posts: 16
Re: Grain runoff on board bow fix
« Reply #17 on: August 16, 2015, 07:24:41 pm »
Ok I'll do that and then that will make the nocks wider too.
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: Grain runoff on board bow fix
« Reply #18 on: August 16, 2015, 07:38:49 pm »
Relay the taper out to half an inch when your done they should be around 3/8"
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹
Pages: 1 [2]
« previous next »